F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » 4ag build up help Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
Jonny2TG Forums Junkie Location: Tasmania Registered: May 2002	Re: 4ag build up help Mon, 03 October 2005 08:00 Things that are going to actualy effect your power are CAMS, get ones almost 300 degrees duration, but you will need a programable computer also. Adjustable cam gears can be used to fine tune this also. Things like ARP studs and bolts, good brand head gasket etc will not give any power, but may keep the engine going for longer if raced hard. These things (like aftermarket con-rods) may increase the effective rev limit before it breaks. If its only going to rev to the stock rev limit, then you can save money and just use the standard Toyota stuff in the bottom end. A lighter flywheel (and lighter car) can improve acceleration, but will not change power. For pistons, I think Toyota ones are fairly good. Decide what compression ratio you want. [Report message to a moderator]

	Subject	Poster	Date
	4ag build up help	Stretch	Sun, 02 October 2005 16:53
	Re: 4ag build up help	Skaney	Mon, 03 October 2005 00:52
	Re: 4ag build up help	Bert	Mon, 03 October 2005 01:13
	Re: 4ag build up help	kingmick	Mon, 03 October 2005 07:14
	Re: 4ag build up help	Jonny2TG	Mon, 03 October 2005 08:00
	Re: 4ag build up help	Stretch	Mon, 03 October 2005 10:52
	Re: 4ag build up help	oldcorollas	Mon, 03 October 2005 11:33
	Re: 4ag build up help	Sam_Q	Tue, 04 October 2005 06:50
	Re: 4ag build up help	Stretch	Tue, 04 October 2005 11:07

Previous Topic:	trd gearset
Next Topic:	Central Locking for AE86

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.