Toymods Car Club Inc: General Car Talk => more power out of an aw11sc

Toymods Car Club
www.toymods.org.au

Toymods » General Car Talk » more power out of an aw11sc Show: Today's Posts :: Show Polls Email to friend

Author

Topic

Henn
Forums Junkie

Location:
Rosanna, Melb
Registered:
June 2002

Re: more power out of an aw11sc	Tue, 04 October 2005 00:28

It sounds like you have pretty much maxed out the power you can get from the engine cheaply. I'd definitely suggest a better intercooler will improve things and agree with the above guys that cams, maybe cam gears and an aftermarket ECU would be a good idea. You could consider an SC14 too and maybe an improved intake manifold, though those two are a little fiddly and take some fabrication. If you are running a bigport (AW11) 4AGZE you already have the biggest factory cams. Shim under bucket is only really needed if you go to BIG cams (9mm+ lift) and are in danger of spitting out shims. Also you don't need to fiddle with injectors or fuel pressure regulator unless you are maxing out your current ones. But as a side note I think 7MGTE, CA18 and some 13B injectors will fit the factory rail. Surely Google can confirm or deny that though. Hen [Report message to a moderator]

Current Time: Thu Jan 30 23:56:29 UTC 2025

Total time taken to generate the page: 0.0080149173736572 seconds

.:: Contact :: Home ::.