F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » Wolf3d Map (and injector info) 1ggte & 1ggze Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
sideshow Forums Junkie Location: sydney Registered: March 2003	Re: Perth - Someone who knows sync and reference with WOLF 3d? Wed, 05 October 2005 11:26 bring it to sydney and ill get it runnin for u tryin to diagnose shit like that over the forums is fukin useless u need to get a laptop to try to go online to the wolf fukin imposible half the time haye u had it runnin before and people wonder y when i quote them 600 to 1000 to wire up some ecus well now some people understand y in 10 years of mechanics and conversions and wiring i have only ever worked on 2 or 3 wolf ecus i guess that tell sme something anyway i guess u just spoke to the wrong person when tryin to decide what to buy now why dont u start from scratch u might learn something too fit a noid light to an injector and a spark tester to the coil lead now remove yr dizzy or crank sensor all u want to do is test the signals without cranking now the toyota has i think 6 or 3 pulses for the cyl ref and 24 or something for the home ref now the dizzy has an inductive signal so the sensors have a common earth and then a signal wire so this means the 12v or 8 v wore for power to the dizzy is not needed the dizzy only needs earth and signal wire now remove dizzy cap and rotor till u see the sensors and wires that goto the sensor now u will see a common wire goin to the sensors usually white this wire goes to the trig earth on the wolf now look at the sensor that picks up the 3 or 6 pulse teeth look at the colour of the signal wire for this sensor and connect it to the cyl ref of the wolf now look at the wire for the 24 tooth sensor and connect it to the home trig now if i read the diagram above seems like u have to cut some of the teeth on the dizzy not sure bout this but best to check maybe look at the software and see if u can adjust how many teeth once u connect the cyl and home wires with ignition on spin the dizzy se if u get any spark or injector pulse if u get something refit the dizzy and try to start it u might have to adjust the dizzy if its anyhting like an ealry ems u had to move the timing back 50 degrees but then on a dizzy that would put the rotor and cap out of alighment so in the end its best to spend that 1000 bucks and get a pro to do it if its anyhting like settin up an autronic u definatley have to modify the dizzy teeth another thing u can do is ring silverwater automotive services see if the dizzy needs to be modified they will mod the dizzy for u for around 150 to 200 bucks thats the price they sort of charge for an autronic dizzy mod for a 4age geez aint microtechs so much easier hehehe [Report message to a moderator]

	Subject	Poster	Date
	Wolf3d Map (and injector info) 1ggte & 1ggze	rx793	Tue, 04 October 2005 11:01
	Re: Perth - Someone who knows sync and reference with WOLF 3d?	1ndecent	Tue, 04 October 2005 12:01
	Re: Perth - Someone who knows sync and reference with WOLF 3d?	rx793	Tue, 04 October 2005 12:17
	Re: Perth - Someone who knows sync and reference with WOLF 3d?	1ndecent	Tue, 04 October 2005 12:36
	Re: Perth - Someone who knows sync and reference with WOLF 3d?	rx793	Tue, 04 October 2005 12:37
	Re: Perth - Someone who knows sync and reference with WOLF 3d?	1ndecent	Tue, 04 October 2005 12:45
	Re: Perth - Someone who knows sync and reference with WOLF 3d?	rx793	Tue, 04 October 2005 12:50
	Re: Perth - Someone who knows sync and reference with WOLF 3d?	1ndecent	Tue, 04 October 2005 13:01
	Re: Perth - Someone who knows sync and reference with WOLF 3d?	rx793	Tue, 04 October 2005 13:09
	Re: Perth - Someone who knows sync and reference with WOLF 3d?	1ndecent	Tue, 04 October 2005 13:25
	Re: Perth - Someone who knows sync and reference with WOLF 3d?	rx793	Tue, 04 October 2005 13:36
	Re: Perth - Someone who knows sync and reference with WOLF 3d?	sideshow	Tue, 04 October 2005 13:40
	Re: Perth - Someone who knows sync and reference with WOLF 3d?	sideshow	Tue, 04 October 2005 13:35
	Re: Perth - Someone who knows sync and reference with WOLF 3d?	1ndecent	Tue, 04 October 2005 13:57
	Re: Perth - Someone who knows sync and reference with WOLF 3d?	1ndecent	Tue, 04 October 2005 14:11
	Re: Perth - Someone who knows sync and reference with WOLF 3d?	rx793	Tue, 04 October 2005 14:20
	Re: Perth - Someone who knows sync and reference with WOLF 3d?	1ndecent	Tue, 04 October 2005 14:37
	Re: Perth - Someone who knows sync and reference with WOLF 3d?	rx793	Tue, 04 October 2005 14:48
	Re: Perth - Someone who knows sync and reference with WOLF 3d?	Allan	Tue, 04 October 2005 20:22
	Re: Perth - Someone who knows sync and reference with WOLF 3d?	CrUZsida	Wed, 05 October 2005 00:58
	Re: Perth - Someone who knows sync and reference with WOLF 3d?	THE WITZL	Wed, 05 October 2005 02:43
	Re: Perth - Someone who knows sync and reference with WOLF 3d?	1ndecent	Wed, 05 October 2005 03:06
	Re: Perth - Someone who knows sync and reference with WOLF 3d?	mrshin	Wed, 05 October 2005 03:15
	Re: Perth - Someone who knows sync and reference with WOLF 3d?	CrUZsida	Wed, 05 October 2005 03:30
	Re: Perth - Someone who knows sync and reference with WOLF 3d?	mrshin	Wed, 05 October 2005 03:31
	Re: Perth - Someone who knows sync and reference with WOLF 3d?	CrUZsida	Wed, 05 October 2005 03:49
	Re: Perth - Someone who knows sync and reference with WOLF 3d?	Chris Davey	Wed, 05 October 2005 04:12
	Re: Perth - Someone who knows sync and reference with WOLF 3d?	sideshow	Wed, 05 October 2005 06:52
	Re: Perth - Someone who knows sync and reference with WOLF 3d?	1ndecent	Wed, 05 October 2005 07:15
	Re: Perth - Someone who knows sync and reference with WOLF 3d?	rx793	Wed, 05 October 2005 07:22
	Re: Perth - Someone who knows sync and reference with WOLF 3d?	Chris Davey	Wed, 05 October 2005 08:06
	Re: Perth - Someone who knows sync and reference with WOLF 3d?	CrUZsida	Wed, 05 October 2005 08:10
	Re: Perth - Someone who knows sync and reference with WOLF 3d?	Chris Davey	Wed, 05 October 2005 08:47
	Re: Perth - Someone who knows sync and reference with WOLF 3d?	Allan	Wed, 05 October 2005 08:57
	Re: Perth - Someone who knows sync and reference with WOLF 3d?	CrUZsida	Wed, 05 October 2005 09:13
	Re: Perth - Someone who knows sync and reference with WOLF 3d?	Pete	Wed, 05 October 2005 09:56
	Re: Perth - Someone who knows sync and reference with WOLF 3d?	sideshow	Wed, 05 October 2005 10:40
	Re: Perth - Someone who knows sync and reference with WOLF 3d?	MaxPower	Thu, 06 October 2005 09:27
	Re: Perth - Someone who knows sync and reference with WOLF 3d?	CrUZsida	Wed, 05 October 2005 10:53
	Re: Perth - Someone who knows sync and reference with WOLF 3d?	rx793	Wed, 05 October 2005 11:06
	Re: Perth - Someone who knows sync and reference with WOLF 3d?	Allan	Wed, 05 October 2005 11:25
	Re: Perth - Someone who knows sync and reference with WOLF 3d?	sideshow	Wed, 05 October 2005 11:26
	Re: Perth - Someone who knows sync and reference with WOLF 3d?	Allan	Wed, 05 October 2005 11:30
	Re: Perth - Someone who knows sync and reference with WOLF 3d?	sideshow	Wed, 05 October 2005 11:41
	Re: Perth - Someone who knows sync and reference with WOLF 3d?	sideshow	Wed, 05 October 2005 11:42
	Re: Perth - Someone who knows sync and reference with WOLF 3d?	earlyrolla	Wed, 05 October 2005 15:12
	Re: Perth - Someone who knows sync and reference with WOLF 3d?	rx793	Wed, 05 October 2005 16:15
	Re: Perth - Someone who knows sync and reference with WOLF 3d?	sebta22	Thu, 06 October 2005 03:21
	Re: Perth - Someone who knows sync and reference with WOLF 3d?	THE WITZL	Wed, 05 October 2005 17:07
	Re: Perth - Someone who knows sync and reference with WOLF 3d?	Allan	Thu, 06 October 2005 13:21
	Re: Perth - Someone who knows sync and reference with WOLF 3d?	sideshow	Thu, 06 October 2005 11:26
	Re: Perth - Someone who knows sync and reference with WOLF 3d?	THE WITZL	Thu, 06 October 2005 13:38
	Re: Perth - Someone who knows sync and reference with WOLF 3d?	Allan	Thu, 06 October 2005 13:45
	Re: Perth - Someone who knows sync and reference with WOLF 3d?	THE WITZL	Thu, 06 October 2005 14:18
	Re: Perth - Someone who knows sync and reference with WOLF 3d?	Allan	Fri, 07 October 2005 08:20
	Re: Perth - Someone who knows sync and reference with WOLF 3d?	rx793	Thu, 06 October 2005 16:18
	Re: Perth - Someone who knows sync and reference with WOLF 3d?	sideshow	Thu, 06 October 2005 22:58
	Re: Perth - Someone who knows sync and reference with WOLF 3d?	rx793	Fri, 07 October 2005 01:11
	Re: Perth - Someone who knows sync and reference with WOLF 3d?	THE WITZL	Fri, 07 October 2005 02:58
	Re: Perth - Someone who knows sync and reference with WOLF 3d?	Blackers	Fri, 07 October 2005 04:07
	Re: Perth - Someone who knows sync and reference with WOLF 3d?	rx793	Fri, 07 October 2005 04:14
	Re: Perth - Someone who knows sync and reference with WOLF 3d?	sideshow	Fri, 07 October 2005 06:04
	Re: Perth - Someone who knows sync and reference with WOLF 3d?	Skip	Fri, 07 October 2005 06:40
	Re: Perth - Someone who knows sync and reference with WOLF 3d?	THE WITZL	Fri, 07 October 2005 07:22
	Re: Perth - Someone who knows sync and reference with WOLF 3d?	rx793	Fri, 07 October 2005 07:38
	Re: Perth - Someone who knows sync and reference with WOLF 3d?	rx793	Fri, 07 October 2005 10:54
	Re: Perth - Someone who knows sync and reference with WOLF 3d?	THE WITZL	Fri, 07 October 2005 11:12
	Re: Perth - Someone who knows sync and reference with WOLF 3d?	rx793	Fri, 07 October 2005 11:30
	Re: Perth - Someone who knows sync and reference with WOLF 3d?	mrshin	Fri, 07 October 2005 14:23
	Re: Perth - Someone who knows sync and reference with WOLF 3d?	rx793	Fri, 07 October 2005 17:29
	Re: Perth - Someone who knows sync and reference with WOLF 3d?	pilot	Fri, 07 October 2005 19:30
	Re: Perth - Someone who knows sync and reference with WOLF 3d?	rx793	Sat, 08 October 2005 13:23
	Re: Wolf3d Continuous "signal error count" Cant get spark or injection	pilot	Sat, 08 October 2005 15:06
	Re: Wolf3d Continuous "signal error count" Cant get spark or injection	THE WITZL	Sun, 09 October 2005 01:19
	Re: Wolf3d Continuous "signal error count" Cant get spark or injection	rx793	Sun, 09 October 2005 14:16
	Re: Wolf3d Continuous "signal error count" Cant get spark or injection	gemtoy	Sun, 09 October 2005 01:53

Previous Topic:	Sprinter interior light cover
Next Topic:	AUTO ELECTRICAL IN [SA] REGION

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.