| Author | Topic |
|---|
Location:
Canberra
Registered:
May 2002
|
|
Re: Wade 267° in my 18psi 4AGZE - help me with setup please!
|
Wed, 05 October 2005 14:07
 
|
 |
I ran the same 267 wade cams in my 4AGTE. As you mentioned, they do knock a bit out of the low rpm torque, but start to really work at around 4000-4500rpm on a boosted motor.
Wade recommend setting the lobe centres (maximum lift) at 110 degrees before & after top dead centre (110/110). This seems to be a good starting point. With dyno time, you could tweak the timing a little to gain a few extra kw in the midrange/topend. I set mine up with a dial guage on the top of the shims and a degree wheel on the crank pulley.
Cheers
Phil
|
|
|
| | Subject | Poster | Date |
|---|
 |
Wade 267° in my 18psi 4AGZE - help me with setup please!
|
nick.parker | Wed, 05 October 2005 00:55 |
|
Re: Wade 267° in my 18psi 4AGZE - help me with setup please!
|
nick.parker | Wed, 05 October 2005 01:48 |
|
Re: Wade 267° in my 18psi 4AGZE - help me with setup please!
|
mr2gze | Wed, 05 October 2005 02:38 |
|
Re: Wade 267° in my 18psi 4AGZE - help me with setup please!
|
Ben Wilson | Wed, 05 October 2005 01:55 |
|
Re: Wade 267° in my 18psi 4AGZE - help me with setup please!
|
nick.parker | Wed, 05 October 2005 02:42 |
|
Re: Wade 267° in my 18psi 4AGZE - help me with setup please!
|
Ben Wilson | Wed, 05 October 2005 03:16 |
|
Re: Wade 267° in my 18psi 4AGZE - help me with setup please!
|
nick.parker | Wed, 05 October 2005 05:19 |
|
Re: Wade 267° in my 18psi 4AGZE - help me with setup please!
|
nick.parker | Wed, 05 October 2005 06:35 |
|
Re: Wade 267° in my 18psi 4AGZE - help me with setup please!
|
improvedae86 | Wed, 05 October 2005 05:58 |
|
Re: Wade 267° in my 18psi 4AGZE - help me with setup please!
|
TE72_Turbo | Wed, 05 October 2005 14:07 |
|
Re: Wade 267° in my 18psi 4AGZE - help me with setup please!
|
bpt-4w | Wed, 05 October 2005 14:25 |
|
Re: Wade 267° in my 18psi 4AGZE - help me with setup please!
|
Ben Wilson | Wed, 05 October 2005 23:23 |
|
Re: Wade 267° in my 18psi 4AGZE - help me with setup please!
|
nick.parker | Thu, 06 October 2005 02:13 |
|
Re: Wade 267° in my 18psi 4AGZE - help me with setup please!
|
nick.parker | Thu, 13 October 2005 13:36 |
|
Re: Wade 267° in my 18psi 4AGZE - help me with setup please!
|
oldcorollas | Thu, 13 October 2005 14:10 |
|
Re: Wade 267° in my 18psi 4AGZE - help me with setup please!
|
myne | Thu, 13 October 2005 22:34 |
|
Re: Wade 267° in my 18psi 4AGZE - help me with setup please!
|
nick.parker | Fri, 14 October 2005 00:18 |
|
Re: Wade 267° in my 18psi 4AGZE - help me with setup please!
|
nick.parker | Fri, 14 October 2005 00:23 |
