Author | Topic |
Location: Perth
Registered: May 2004
|
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
Thu, 06 October 2005 09:27

|
 |
rx793 wrote on Thu, 06 October 2005 00:15 | Any other ideas guys?
|
Did you try the map i modified for you?? The mode 0 sync offset needed to be 1 and not 3 like in your map if the triggering is the same as the 7mgte. Your trigger levels also need adjusting in the software otherwise sync errors will occur, are you getting these?? If sync errors occur #1 cyl will fire, it will lose sync, wait for the cam pulse again, then spark the #1 cylinder again - sounds like what you described above.
Also what firmware version is your wolf running??
rx793 wrote on Thu, 06 October 2005 00:15 |
Would someone be able to explain the terms on the wolf 3d laptop if i wrote up what was on the screen (certain settings that i dont know what they do)
Steve
|
What ones do you need to know??
sideshow wrote on Wed, 05 October 2005 18:40 | its probably cheaper to buy a microtech and wire it up and it will start first go
hehehe
|
what exactly like my 1uz did with a wolf 3d?? Used all the factory sensors, controlled the factory idle stepper motor and cost the same as a microtech I think alot of it comes down to how it is wired. But one things for sure the wolf manual is crap, they really need to explain it in way more detail.
[Updated on: Thu, 06 October 2005 10:55]
|
|
|
| Subject | Poster | Date |
 |
Wolf3d Map (and injector info) 1ggte & 1ggze
|
rx793 | Tue, 04 October 2005 11:01 |
 |
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
1ndecent | Tue, 04 October 2005 12:01 |
 |
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
rx793 | Tue, 04 October 2005 12:17 |
 |
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
1ndecent | Tue, 04 October 2005 12:36 |
 |
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
rx793 | Tue, 04 October 2005 12:37 |
 |
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
1ndecent | Tue, 04 October 2005 12:45 |
 |
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
rx793 | Tue, 04 October 2005 12:50 |
 |
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
1ndecent | Tue, 04 October 2005 13:01 |
 |
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
rx793 | Tue, 04 October 2005 13:09 |
 |
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
1ndecent | Tue, 04 October 2005 13:25 |
 |
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
rx793 | Tue, 04 October 2005 13:36 |
 |
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
sideshow | Tue, 04 October 2005 13:40 |
 |
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
sideshow | Tue, 04 October 2005 13:35 |
 |
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
1ndecent | Tue, 04 October 2005 13:57 |
 |
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
1ndecent | Tue, 04 October 2005 14:11 |
 |
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
rx793 | Tue, 04 October 2005 14:20 |
 |
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
1ndecent | Tue, 04 October 2005 14:37 |
 |
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
rx793 | Tue, 04 October 2005 14:48 |
 |
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
Allan | Tue, 04 October 2005 20:22 |
 |
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
CrUZsida | Wed, 05 October 2005 00:58 |
 |
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
THE WITZL | Wed, 05 October 2005 02:43 |
 |
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
1ndecent | Wed, 05 October 2005 03:06 |
 |
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
mrshin | Wed, 05 October 2005 03:15 |
 |
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
CrUZsida | Wed, 05 October 2005 03:30 |
 |
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
mrshin | Wed, 05 October 2005 03:31 |
 |
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
CrUZsida | Wed, 05 October 2005 03:49 |
 |
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
Chris Davey | Wed, 05 October 2005 04:12 |
 |
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
sideshow | Wed, 05 October 2005 06:52 |
 |
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
1ndecent | Wed, 05 October 2005 07:15 |
 |
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
rx793 | Wed, 05 October 2005 07:22 |
 |
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
Chris Davey | Wed, 05 October 2005 08:06 |
 |
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
CrUZsida | Wed, 05 October 2005 08:10 |
 |
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
Chris Davey | Wed, 05 October 2005 08:47 |
 |
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
Allan | Wed, 05 October 2005 08:57 |
 |
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
CrUZsida | Wed, 05 October 2005 09:13 |
 |
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
Pete | Wed, 05 October 2005 09:56 |
 |
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
sideshow | Wed, 05 October 2005 10:40 |
 |
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
MaxPower | Thu, 06 October 2005 09:27 |
 |
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
CrUZsida | Wed, 05 October 2005 10:53 |
 |
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
rx793 | Wed, 05 October 2005 11:06 |
 |
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
Allan | Wed, 05 October 2005 11:25 |
 |
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
sideshow | Wed, 05 October 2005 11:26 |
 |
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
Allan | Wed, 05 October 2005 11:30 |
 |
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
sideshow | Wed, 05 October 2005 11:41 |
 |
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
sideshow | Wed, 05 October 2005 11:42 |
 |
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
earlyrolla | Wed, 05 October 2005 15:12 |
 |
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
rx793 | Wed, 05 October 2005 16:15 |
 |
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
sebta22 | Thu, 06 October 2005 03:21 |
 |
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
THE WITZL | Wed, 05 October 2005 17:07 |
 |
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
Allan | Thu, 06 October 2005 13:21 |
 |
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
sideshow | Thu, 06 October 2005 11:26 |
 |
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
THE WITZL | Thu, 06 October 2005 13:38 |
 |
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
Allan | Thu, 06 October 2005 13:45 |
 |
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
THE WITZL | Thu, 06 October 2005 14:18 |
 |
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
Allan | Fri, 07 October 2005 08:20 |
 |
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
rx793 | Thu, 06 October 2005 16:18 |
 |
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
sideshow | Thu, 06 October 2005 22:58 |
 |
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
rx793 | Fri, 07 October 2005 01:11 |
 |
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
THE WITZL | Fri, 07 October 2005 02:58 |
 |
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
Blackers | Fri, 07 October 2005 04:07 |
 |
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
rx793 | Fri, 07 October 2005 04:14 |
 |
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
sideshow | Fri, 07 October 2005 06:04 |
 |
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
Skip | Fri, 07 October 2005 06:40 |
 |
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
THE WITZL | Fri, 07 October 2005 07:22 |
 |
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
rx793 | Fri, 07 October 2005 07:38 |
 |
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
rx793 | Fri, 07 October 2005 10:54 |
 |
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
THE WITZL | Fri, 07 October 2005 11:12 |
 |
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
rx793 | Fri, 07 October 2005 11:30 |
 |
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
mrshin | Fri, 07 October 2005 14:23 |
 |
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
rx793 | Fri, 07 October 2005 17:29 |
 |
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
pilot | Fri, 07 October 2005 19:30 |
 |
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
rx793 | Sat, 08 October 2005 13:23 |
 |
Re: Wolf3d Continuous "signal error count" Cant get spark or injection
|
pilot | Sat, 08 October 2005 15:06 |
 |
Re: Wolf3d Continuous "signal error count" Cant get spark or injection
|
THE WITZL | Sun, 09 October 2005 01:19 |
 |
Re: Wolf3d Continuous "signal error count" Cant get spark or injection
|
rx793 | Sun, 09 October 2005 14:16 |
 |
Re: Wolf3d Continuous "signal error count" Cant get spark or injection
|
gemtoy | Sun, 09 October 2005 01:53 |