| Author | Topic |
|---|
Toymods Social Secretary
Location:
Sydney
Registered:
July 2002
|
|
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
Thu, 06 October 2005 13:38
 
|
 |
Teh Witzl has the Answer!
Well here you have it.... you in fact will need to wire the CAS reluctor sensors in REVERSE!
Why??
# In the installation manual for the Wolf3D, section 3.2.1 page 10 (and repeatedly in other locations), it states that the reluctor output Must look like this:
# From all the reading i've done, Toyota reluctor signals (and virtually all other reluctor ignition signals) are in fact the opposite - the voltage goes positive first, and then negative.
# To obtain the correct signal, you need to reverse the wires you are using! This means the white wires which were previously common earth are now your trigger wires, and the other colours are your common earth (dont forget to NOT connect G1, as this will cause signal noise if it's connected)
How do i know i'm right?
I asked Mr Velleman, the handheld oscilliscope!
He said this:
|
|
|
| | Subject | Poster | Date |
|---|
 |
Wolf3d Map (and injector info) 1ggte & 1ggze
|
rx793 | Tue, 04 October 2005 11:01 |
|
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
1ndecent | Tue, 04 October 2005 12:01 |
|
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
rx793 | Tue, 04 October 2005 12:17 |
|
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
1ndecent | Tue, 04 October 2005 12:36 |
|
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
rx793 | Tue, 04 October 2005 12:37 |
|
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
1ndecent | Tue, 04 October 2005 12:45 |
|
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
rx793 | Tue, 04 October 2005 12:50 |
|
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
1ndecent | Tue, 04 October 2005 13:01 |
|
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
rx793 | Tue, 04 October 2005 13:09 |
|
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
1ndecent | Tue, 04 October 2005 13:25 |
|
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
rx793 | Tue, 04 October 2005 13:36 |
|
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
sideshow | Tue, 04 October 2005 13:40 |
|
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
sideshow | Tue, 04 October 2005 13:35 |
|
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
1ndecent | Tue, 04 October 2005 13:57 |
|
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
1ndecent | Tue, 04 October 2005 14:11 |
|
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
rx793 | Tue, 04 October 2005 14:20 |
|
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
1ndecent | Tue, 04 October 2005 14:37 |
|
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
rx793 | Tue, 04 October 2005 14:48 |
|
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
Allan | Tue, 04 October 2005 20:22 |
|
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
CrUZsida | Wed, 05 October 2005 00:58 |
|
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
THE WITZL | Wed, 05 October 2005 02:43 |
|
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
1ndecent | Wed, 05 October 2005 03:06 |
|
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
mrshin | Wed, 05 October 2005 03:15 |
|
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
CrUZsida | Wed, 05 October 2005 03:30 |
|
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
mrshin | Wed, 05 October 2005 03:31 |
|
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
CrUZsida | Wed, 05 October 2005 03:49 |
|
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
Chris Davey | Wed, 05 October 2005 04:12 |
|
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
sideshow | Wed, 05 October 2005 06:52 |
|
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
1ndecent | Wed, 05 October 2005 07:15 |
|
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
rx793 | Wed, 05 October 2005 07:22 |
|
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
Chris Davey | Wed, 05 October 2005 08:06 |
|
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
CrUZsida | Wed, 05 October 2005 08:10 |
|
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
Chris Davey | Wed, 05 October 2005 08:47 |
|
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
Allan | Wed, 05 October 2005 08:57 |
|
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
CrUZsida | Wed, 05 October 2005 09:13 |
|
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
Pete | Wed, 05 October 2005 09:56 |
|
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
sideshow | Wed, 05 October 2005 10:40 |
|
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
MaxPower | Thu, 06 October 2005 09:27 |
|
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
CrUZsida | Wed, 05 October 2005 10:53 |
|
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
rx793 | Wed, 05 October 2005 11:06 |
|
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
Allan | Wed, 05 October 2005 11:25 |
|
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
sideshow | Wed, 05 October 2005 11:26 |
|
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
Allan | Wed, 05 October 2005 11:30 |
|
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
sideshow | Wed, 05 October 2005 11:41 |
|
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
sideshow | Wed, 05 October 2005 11:42 |
|
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
earlyrolla | Wed, 05 October 2005 15:12 |
|
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
rx793 | Wed, 05 October 2005 16:15 |
|
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
sebta22 | Thu, 06 October 2005 03:21 |
|
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
THE WITZL | Wed, 05 October 2005 17:07 |
|
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
Allan | Thu, 06 October 2005 13:21 |
|
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
sideshow | Thu, 06 October 2005 11:26 |
|
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
THE WITZL | Thu, 06 October 2005 13:38 |
|
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
Allan | Thu, 06 October 2005 13:45 |
|
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
THE WITZL | Thu, 06 October 2005 14:18 |
|
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
Allan | Fri, 07 October 2005 08:20 |
|
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
rx793 | Thu, 06 October 2005 16:18 |
|
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
sideshow | Thu, 06 October 2005 22:58 |
|
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
rx793 | Fri, 07 October 2005 01:11 |
|
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
THE WITZL | Fri, 07 October 2005 02:58 |
|
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
Blackers | Fri, 07 October 2005 04:07 |
|
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
rx793 | Fri, 07 October 2005 04:14 |
|
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
sideshow | Fri, 07 October 2005 06:04 |
|
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
Skip | Fri, 07 October 2005 06:40 |
|
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
THE WITZL | Fri, 07 October 2005 07:22 |
|
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
rx793 | Fri, 07 October 2005 07:38 |
|
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
rx793 | Fri, 07 October 2005 10:54 |
|
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
THE WITZL | Fri, 07 October 2005 11:12 |
|
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
rx793 | Fri, 07 October 2005 11:30 |
|
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
mrshin | Fri, 07 October 2005 14:23 |
|
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
rx793 | Fri, 07 October 2005 17:29 |
|
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
pilot | Fri, 07 October 2005 19:30 |
|
Re: Perth - Someone who knows sync and reference with WOLF 3d?
|
rx793 | Sat, 08 October 2005 13:23 |
|
Re: Wolf3d Continuous "signal error count" Cant get spark or injection
|
pilot | Sat, 08 October 2005 15:06 |
|
Re: Wolf3d Continuous "signal error count" Cant get spark or injection
|
THE WITZL | Sun, 09 October 2005 01:19 |
|
Re: Wolf3d Continuous "signal error count" Cant get spark or injection
|
rx793 | Sun, 09 October 2005 14:16 |
|
Re: Wolf3d Continuous "signal error count" Cant get spark or injection
|
gemtoy | Sun, 09 October 2005 01:53 |
