Toymods Car Club Inc: Tech & Conversions => Wolf3d Map (and injector info) 1ggte & 1ggze

Toymods Car Club
www.toymods.org.au

F.A.Q.

Toymods » Tech & Conversions » Wolf3d Map (and injector info) 1ggte & 1ggze Show: Today's Posts :: Show Polls Email to friend

Author

Topic

sideshow
Forums Junkie

Location:
sydney
Registered:
March 2003

Re: Perth - Someone who knows sync and reference with WOLF 3d?	Thu, 06 October 2005 22:58

hey witzl it might be bit hard to reverse the wires as the white wire is common and splits into 2 or 3 inside the dizzy if the wolf works like an autronic all u do is rising or falling edge but in the end if u run a reluctor interface it changes the sine wave to a square wave so i guess thats y u can have a rising edge or falling edge settup when u have a square wave and when selecting rising or falling edge all it does is adjust the timing by afew degrees the best thing for him to do it to find out if anyone has run a wolf without a reluctor interface properly on a toyota dizzy sensor with all this fuking round if the reluctor interface fixes his problem then just spend the 200 bucks or whatever it is and get the right part [Report message to a moderator]

Send a private message to this user

[Message index]

Subject Poster Date

Read Message Wolf3d Map (and injector info) 1ggte & 1ggze rx793 Tue, 04 October 2005 11:01
Re: Perth - Someone who knows sync and reference with WOLF 3d? 1ndecent Tue, 04 October 2005 12:01
Re: Perth - Someone who knows sync and reference with WOLF 3d? rx793 Tue, 04 October 2005 12:17
Read Message Re: Perth - Someone who knows sync and reference with WOLF 3d? 1ndecent Tue, 04 October 2005 12:36
Re: Perth - Someone who knows sync and reference with WOLF 3d? rx793 Tue, 04 October 2005 12:37
Re: Perth - Someone who knows sync and reference with WOLF 3d? 1ndecent Tue, 04 October 2005 12:45
Read Message Re: Perth - Someone who knows sync and reference with WOLF 3d? rx793 Tue, 04 October 2005 12:50
Re: Perth - Someone who knows sync and reference with WOLF 3d? 1ndecent Tue, 04 October 2005 13:01
Re: Perth - Someone who knows sync and reference with WOLF 3d? rx793 Tue, 04 October 2005 13:09
Read Message Re: Perth - Someone who knows sync and reference with WOLF 3d? 1ndecent Tue, 04 October 2005 13:25
Re: Perth - Someone who knows sync and reference with WOLF 3d? rx793 Tue, 04 October 2005 13:36
Re: Perth - Someone who knows sync and reference with WOLF 3d? sideshow Tue, 04 October 2005 13:40
Read Message Re: Perth - Someone who knows sync and reference with WOLF 3d? sideshow Tue, 04 October 2005 13:35
Re: Perth - Someone who knows sync and reference with WOLF 3d? 1ndecent Tue, 04 October 2005 13:57
Re: Perth - Someone who knows sync and reference with WOLF 3d? 1ndecent Tue, 04 October 2005 14:11
Read Message Re: Perth - Someone who knows sync and reference with WOLF 3d? rx793 Tue, 04 October 2005 14:20
Re: Perth - Someone who knows sync and reference with WOLF 3d? 1ndecent Tue, 04 October 2005 14:37
Re: Perth - Someone who knows sync and reference with WOLF 3d? rx793 Tue, 04 October 2005 14:48
Read Message Re: Perth - Someone who knows sync and reference with WOLF 3d? Allan Tue, 04 October 2005 20:22
Re: Perth - Someone who knows sync and reference with WOLF 3d? CrUZsida Wed, 05 October 2005 00:58
Re: Perth - Someone who knows sync and reference with WOLF 3d? THE WITZL Wed, 05 October 2005 02:43
Read Message Re: Perth - Someone who knows sync and reference with WOLF 3d? 1ndecent Wed, 05 October 2005 03:06
Re: Perth - Someone who knows sync and reference with WOLF 3d? mrshin Wed, 05 October 2005 03:15
Re: Perth - Someone who knows sync and reference with WOLF 3d? CrUZsida Wed, 05 October 2005 03:30
Read Message Re: Perth - Someone who knows sync and reference with WOLF 3d? mrshin Wed, 05 October 2005 03:31
Re: Perth - Someone who knows sync and reference with WOLF 3d? CrUZsida Wed, 05 October 2005 03:49
Re: Perth - Someone who knows sync and reference with WOLF 3d? Chris Davey Wed, 05 October 2005 04:12
Read Message Re: Perth - Someone who knows sync and reference with WOLF 3d? sideshow Wed, 05 October 2005 06:52
Re: Perth - Someone who knows sync and reference with WOLF 3d? 1ndecent Wed, 05 October 2005 07:15
Re: Perth - Someone who knows sync and reference with WOLF 3d? rx793 Wed, 05 October 2005 07:22
Read Message Re: Perth - Someone who knows sync and reference with WOLF 3d? Chris Davey Wed, 05 October 2005 08:06
Re: Perth - Someone who knows sync and reference with WOLF 3d? CrUZsida Wed, 05 October 2005 08:10
Re: Perth - Someone who knows sync and reference with WOLF 3d? Chris Davey Wed, 05 October 2005 08:47
Read Message Re: Perth - Someone who knows sync and reference with WOLF 3d? Allan Wed, 05 October 2005 08:57
Re: Perth - Someone who knows sync and reference with WOLF 3d? CrUZsida Wed, 05 October 2005 09:13
Re: Perth - Someone who knows sync and reference with WOLF 3d? Pete Wed, 05 October 2005 09:56
Read Message Re: Perth - Someone who knows sync and reference with WOLF 3d? sideshow Wed, 05 October 2005 10:40
Re: Perth - Someone who knows sync and reference with WOLF 3d? MaxPower Thu, 06 October 2005 09:27
Re: Perth - Someone who knows sync and reference with WOLF 3d? CrUZsida Wed, 05 October 2005 10:53
Read Message Re: Perth - Someone who knows sync and reference with WOLF 3d? rx793 Wed, 05 October 2005 11:06
Re: Perth - Someone who knows sync and reference with WOLF 3d? Allan Wed, 05 October 2005 11:25
Re: Perth - Someone who knows sync and reference with WOLF 3d? sideshow Wed, 05 October 2005 11:26
Read Message Re: Perth - Someone who knows sync and reference with WOLF 3d? Allan Wed, 05 October 2005 11:30
Re: Perth - Someone who knows sync and reference with WOLF 3d? sideshow Wed, 05 October 2005 11:41
Re: Perth - Someone who knows sync and reference with WOLF 3d? sideshow Wed, 05 October 2005 11:42
Read Message Re: Perth - Someone who knows sync and reference with WOLF 3d? earlyrolla Wed, 05 October 2005 15:12
Re: Perth - Someone who knows sync and reference with WOLF 3d? rx793 Wed, 05 October 2005 16:15
Re: Perth - Someone who knows sync and reference with WOLF 3d? sebta22 Thu, 06 October 2005 03:21
Read Message Re: Perth - Someone who knows sync and reference with WOLF 3d? THE WITZL Wed, 05 October 2005 17:07
Re: Perth - Someone who knows sync and reference with WOLF 3d? Allan Thu, 06 October 2005 13:21
Re: Perth - Someone who knows sync and reference with WOLF 3d? sideshow Thu, 06 October 2005 11:26
Read Message Re: Perth - Someone who knows sync and reference with WOLF 3d? THE WITZL Thu, 06 October 2005 13:38
Re: Perth - Someone who knows sync and reference with WOLF 3d? Allan Thu, 06 October 2005 13:45
Re: Perth - Someone who knows sync and reference with WOLF 3d? THE WITZL Thu, 06 October 2005 14:18
Read Message Re: Perth - Someone who knows sync and reference with WOLF 3d? Allan Fri, 07 October 2005 08:20
Re: Perth - Someone who knows sync and reference with WOLF 3d? rx793 Thu, 06 October 2005 16:18
Re: Perth - Someone who knows sync and reference with WOLF 3d? sideshow Thu, 06 October 2005 22:58
Read Message Re: Perth - Someone who knows sync and reference with WOLF 3d? rx793 Fri, 07 October 2005 01:11
Re: Perth - Someone who knows sync and reference with WOLF 3d? THE WITZL Fri, 07 October 2005 02:58
Re: Perth - Someone who knows sync and reference with WOLF 3d? Blackers Fri, 07 October 2005 04:07
Read Message Re: Perth - Someone who knows sync and reference with WOLF 3d? rx793 Fri, 07 October 2005 04:14
Re: Perth - Someone who knows sync and reference with WOLF 3d? sideshow Fri, 07 October 2005 06:04
Re: Perth - Someone who knows sync and reference with WOLF 3d? Skip Fri, 07 October 2005 06:40
Read Message Re: Perth - Someone who knows sync and reference with WOLF 3d? THE WITZL Fri, 07 October 2005 07:22
Re: Perth - Someone who knows sync and reference with WOLF 3d? rx793 Fri, 07 October 2005 07:38
Re: Perth - Someone who knows sync and reference with WOLF 3d? rx793 Fri, 07 October 2005 10:54
Read Message Re: Perth - Someone who knows sync and reference with WOLF 3d? THE WITZL Fri, 07 October 2005 11:12
Re: Perth - Someone who knows sync and reference with WOLF 3d? rx793 Fri, 07 October 2005 11:30
Re: Perth - Someone who knows sync and reference with WOLF 3d? mrshin Fri, 07 October 2005 14:23
Read Message Re: Perth - Someone who knows sync and reference with WOLF 3d? rx793 Fri, 07 October 2005 17:29
Re: Perth - Someone who knows sync and reference with WOLF 3d? pilot Fri, 07 October 2005 19:30
Re: Perth - Someone who knows sync and reference with WOLF 3d? rx793 Sat, 08 October 2005 13:23
Read Message Re: Wolf3d Continuous "signal error count" Cant get spark or injection pilot Sat, 08 October 2005 15:06
Re: Wolf3d Continuous "signal error count" Cant get spark or injection THE WITZL Sun, 09 October 2005 01:19
Re: Wolf3d Continuous "signal error count" Cant get spark or injection rx793 Sun, 09 October 2005 14:16
Read Message Re: Wolf3d Continuous "signal error count" Cant get spark or injection gemtoy Sun, 09 October 2005 01:53

Previous Topic: Sprinter interior light cover
Next Topic: AUTO ELECTRICAL IN [SA] REGION

-=] Back to Top [=-

Current Time: Fri Jul 25 01:24:01 UTC 2025

Total time taken to generate the page: 0.005450963973999 seconds

.:: Contact :: Home ::.

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.