| Author | Topic |
|---|
Location:
Kita-Ku, Sapporo, Japan
Registered:
January 2003
|
|
Re: ke70 gearbox question
|
Sun, 09 October 2005 03:42
 
|
 |
answer is maybe 
as long as the two halves bolt up in the middle.... and the centre bearing position is still the same... measure bolt spacing and see  .. it's gotta be close...
just a thought, you could also look at KE30 single piece shafts, as they are a little shorter (and KE20 and then KE10 shorter still), but you would have to match the bearing size with the T series flange at the diff.. but it gives you three more length options...
|
|
|
| | Subject | Poster | Date |
|---|
 |
ke70 gearbox question
|
tin can | Fri, 07 October 2005 09:15 |
|
Re: ke70 gearbox question
|
Phrostbyte | Fri, 07 October 2005 14:30 |
|
Re: ke70 gearbox question
|
oldcorollas | Fri, 07 October 2005 15:26 |
|
Re: ke70 gearbox question
|
September_Squall | Fri, 07 October 2005 15:44 |
|
Re: ke70 gearbox question
|
Phrostbyte | Sat, 08 October 2005 00:45 |
|
Re: ke70 gearbox question
|
tin can | Sat, 08 October 2005 02:04 |
|
Re: ke70 gearbox question
|
Phrostbyte | Sat, 08 October 2005 02:50 |
|
Re: ke70 gearbox question
|
oldcorollas | Sat, 08 October 2005 04:03 |
|
Re: ke70 gearbox question
|
tin can | Sat, 08 October 2005 06:17 |
|
Re: ke70 gearbox question
|
Phrostbyte | Sat, 08 October 2005 06:36 |
|
Re: ke70 gearbox question
|
tin can | Sat, 08 October 2005 06:40 |
|
Re: ke70 gearbox question
|
September_Squall | Sat, 08 October 2005 17:00 |
|
Re: ke70 gearbox question
|
tin can | Sun, 09 October 2005 01:07 |
|
Re: ke70 gearbox question
|
oldcorollas | Sun, 09 October 2005 03:42 |
|
Re: ke70 gearbox question
|
tin can | Sun, 09 October 2005 03:59 |
