Author | Topic |
![](images/custom_avatars/9764)
Location: Melbourne, Australia
Registered: March 2005
|
Notes on 2T-G parts availability
|
Mon, 10 October 2005 15:03
![Go to previous message Go to previous message](http://forums.toymods.org.au/theme/default/images/up.gif)
|
![](blank.gif) |
Them's fighting words, don't let Bill or Rod see you.
Contrary to Grumpy(?)'s suggestion, 3T-C pistons are not hard to find, I think he's confused with 3T-G pistons. 3T-C ACL p/n 4MKRY2735 includes moly rings and pins. As at 5/10/2005 4MKRY2735 +0.5mm OS is discontinued with some NOS available and 4MKRY2735 +1.0mm OS is available, approx $300 RRP.
If you're going to rebuild it, don't just stick to 2T-G unless the following is satisfied;
a) you're on a very tight budget, and
b) your pistons and crank are going to be reused (see (a) above).
Otherwise I reckon you'd be doing yourself a disservice not to shell out $100 for a crank, $300 for some pistons, $100 for the requisite flycutting and building the motor out to 1800cc. Contrary to Grumpy(?)'s suggestion it's not hard to get the pistons flycut, it's not exactly black magic.
Rings aren't so hard to cross-reference from other applications if you've got a common bore size and ring groove dimensions etc.
I couldn't find 2T-G valves lately, 18R-G valves can be used, exhaust is straight fit, inlet is 0.5m OS. Can lathe them down... or just lap them in well I guess.
Main & big end bearings and thrust washers are available through ACL. I think the Toyota parts may be NLA and NOS only now. They'll still be on the Toyota EPC as 2T-GEU in TE71 Corolla GT though. Earlier chassis data has been retired from the Toyota database from at least 05/2005.
Gasket kits are available through Stuart Wilkins Motorsport in Sydney, either as VRS or full set.
|
|
|
| Subject | Poster | Date |
![Read Message Read Message](http://forums.toymods.org.au/theme/default/images/pmsg_read.gif) |
upgrade from 2tg?
|
wonky | Mon, 10 October 2005 09:53 |
![Read Message Read Message](http://forums.toymods.org.au/theme/default/images/pmsg_read.gif) |
Re: upgrade from 2tg?
|
t_temperley | Mon, 10 October 2005 10:09 |
![Read Message Read Message](http://forums.toymods.org.au/theme/default/images/pmsg_read.gif) |
Re: upgrade from 2tg?
|
wonky | Mon, 10 October 2005 10:31 |
![Read Message Read Message](http://forums.toymods.org.au/theme/default/images/pmsg_read.gif) |
Re: upgrade from 2tg?
|
oldcorollas | Mon, 10 October 2005 10:43 |
![Read Message Read Message](http://forums.toymods.org.au/theme/default/images/pmsg_read.gif) |
Re: upgrade from 2tg?
|
wombat | Mon, 10 October 2005 11:10 |
![Read Message Read Message](http://forums.toymods.org.au/theme/default/images/pmsg_read.gif) |
Re: upgrade from 2tg?
|
mrshin | Mon, 10 October 2005 13:55 |
![Read Message Read Message](http://forums.toymods.org.au/theme/default/images/pmsg_read.gif) |
Notes on 2T-G parts availability
|
September_Squall | Mon, 10 October 2005 15:03 |
![Read Message Read Message](http://forums.toymods.org.au/theme/default/images/pmsg_read.gif) |
Re: Notes on 2T-G parts availability
|
wombat | Tue, 11 October 2005 01:36 |
![Read Message Read Message](http://forums.toymods.org.au/theme/default/images/pmsg_read.gif) |
Re: upgrade from 2tg?
|
wonky | Wed, 12 October 2005 07:50 |
![Read Message Read Message](http://forums.toymods.org.au/theme/default/images/pmsg_read.gif) |
Re: upgrade from 2tg?
|
September_Squall | Thu, 13 October 2005 00:19 |