| Author | Topic |
|---|
I supported Toymods
Location:
I renounced punctuation
Registered:
May 2002
|
|
Re: 1jzgte into to mz20?? whats got to b done?
|
Sat, 15 February 2003 09:37
 
|
 |
1) Yep, it should. There is only about 10-20mm difference in length.
2) The MZ20, MA70 and MX83 are pretty much based on the same floor plan. Measure up a JZA70 Xmember and see if it's the same. You might just be lucky. Otherwise, you will need to make some engine mounts and/or modify your Xmember.
3) Clearly you will need to run the 1JZGTE ECU and loom.
4) Provided you have a bellhousing to suit, an R154 will bolt right up. However, I don't believe the 7MGTE MZ20 was ever available as a manual, so the tranny tunnel may not be capacious enough without hammer modification. Of course, you will need all the related crap to convert from auto to manual (pedal box, master and slave cylinders, hydraulic line, flywheel, clutch, spiggot bearing). You might need to get the pedal box from a GZ20.
5) Someone who has done exactly such a conversion.
6) Unless you are loaded, no. Not only are they expensive, they will add considerably to start up time. Perhaps the Y pipe mod, but I believe this is around a $5-700 job. The Novocastrian 1J boys would be able to tell you if it's worth doing out of car.
Change front and rear oil seals, timing belt and serpentine belt.
|
|
|
| | Subject | Poster | Date |
|---|
 |
1jzgte into to mz20?? whats got to b done?
|
Heyah | Sat, 15 February 2003 01:15 |
|
Re: 1jzgte into to mz20?? whats got to b done?
|
ROBBO_ma61 | Sat, 15 February 2003 01:57 |
|
Re: 1jzgte into to mz20?? whats got to b done?
|
justcallmefrank | Sat, 15 February 2003 08:41 |
|
Re: 1jzgte into to mz20?? whats got to b done?
|
gianttomato | Sat, 15 February 2003 09:37 |
|
Re: 1jzgte into to mz20?? whats got to b done?
|
mrshin | Sat, 15 February 2003 12:29 |
|
Re: 1jzgte into to mz20?? whats got to b done?
|
gianttomato | Sat, 15 February 2003 12:48 |
|
Re: 1jzgte into to mz20?? whats got to b done?
|
Heyah | Sat, 15 February 2003 14:15 |
|
Re: 1jzgte into to mz20?? whats got to b done?
|
draven | Sun, 16 February 2003 03:33 |
|
Re: 1jzgte into to mz20?? whats got to b done?
|
Heyah | Sun, 16 February 2003 03:59 |
|
Re: 1jzgte into to mz20?? whats got to b done?
|
draven | Sun, 16 February 2003 04:12 |
