| Author | Topic |
|---|
Location:
Perth
Registered:
January 2005
|
|
Re: Wade 267° in my 18psi 4AGZE - help me with setup please!
|
Thu, 13 October 2005 13:36
 
|
 |
Hi,
Well I just thought I'd finish up this thread. My mate helped me setup the cams to Wade's specs using a dial gauge, wasn't so hard after all  .
After a quick drive, and a quick retune of my ECU by me, and then another quick drive the car was going reasonably quite well, more in the mid to high rpm, but still thanks to 18psi perfectly drivable at any rpm. Honestly I felt like I lost out pretty badly on how the car was previously going with stock cams.
Anyway, as my first bit of timing exploration I advanced the inlet cam 5° and also the exhaust 5° to maintain the same small overlap and hence idle vacuum, and then retarded ignition timing back 10° and went for another drive.
WHAT A DIFFERENCE!!!
In the low-mid to mid -upper rpm range the car is hauling again.
I have yet to play anymore but seat of the pants I'd say heaps of torque (maybe 20%) was added across a large rev range.
I can't wait to play more. Anyway thanks for everyones suggestions.
Moral = I guess Wades cams timings don't work so well for 18psi of supercharged air! But they are a fine starting point.
Cheers, Nick.
|
|
|
| | Subject | Poster | Date |
|---|
 |
Wade 267° in my 18psi 4AGZE - help me with setup please!
|
nick.parker | Wed, 05 October 2005 00:55 |
|
Re: Wade 267° in my 18psi 4AGZE - help me with setup please!
|
nick.parker | Wed, 05 October 2005 01:48 |
|
Re: Wade 267° in my 18psi 4AGZE - help me with setup please!
|
mr2gze | Wed, 05 October 2005 02:38 |
|
Re: Wade 267° in my 18psi 4AGZE - help me with setup please!
|
Ben Wilson | Wed, 05 October 2005 01:55 |
|
Re: Wade 267° in my 18psi 4AGZE - help me with setup please!
|
nick.parker | Wed, 05 October 2005 02:42 |
|
Re: Wade 267° in my 18psi 4AGZE - help me with setup please!
|
Ben Wilson | Wed, 05 October 2005 03:16 |
|
Re: Wade 267° in my 18psi 4AGZE - help me with setup please!
|
nick.parker | Wed, 05 October 2005 05:19 |
|
Re: Wade 267° in my 18psi 4AGZE - help me with setup please!
|
nick.parker | Wed, 05 October 2005 06:35 |
|
Re: Wade 267° in my 18psi 4AGZE - help me with setup please!
|
improvedae86 | Wed, 05 October 2005 05:58 |
|
Re: Wade 267° in my 18psi 4AGZE - help me with setup please!
|
TE72_Turbo | Wed, 05 October 2005 14:07 |
|
Re: Wade 267° in my 18psi 4AGZE - help me with setup please!
|
bpt-4w | Wed, 05 October 2005 14:25 |
|
Re: Wade 267° in my 18psi 4AGZE - help me with setup please!
|
Ben Wilson | Wed, 05 October 2005 23:23 |
|
Re: Wade 267° in my 18psi 4AGZE - help me with setup please!
|
nick.parker | Thu, 06 October 2005 02:13 |
|
Re: Wade 267° in my 18psi 4AGZE - help me with setup please!
|
nick.parker | Thu, 13 October 2005 13:36 |
|
Re: Wade 267° in my 18psi 4AGZE - help me with setup please!
|
oldcorollas | Thu, 13 October 2005 14:10 |
|
Re: Wade 267° in my 18psi 4AGZE - help me with setup please!
|
myne | Thu, 13 October 2005 22:34 |
|
Re: Wade 267° in my 18psi 4AGZE - help me with setup please!
|
nick.parker | Fri, 14 October 2005 00:18 |
|
Re: Wade 267° in my 18psi 4AGZE - help me with setup please!
|
nick.parker | Fri, 14 October 2005 00:23 |
