F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » Wade 267° in my 18psi 4AGZE - help me with setup please! Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
nick.parker Regular Location: Perth Registered: January 2005	Re: Wade 267° in my 18psi 4AGZE - help me with setup please! Fri, 14 October 2005 00:18 Hi, I don't thrash the car too badly (now I'm 30 and got two little kids!). Running 18psi was a real experiment, and I have been daily driving it with the occasional 'blats' on the way to work for about 4.5 months now and even to my surprise the SC appears to be standing the test of time so far. So I think I have proven an 18psi SC14 setup can work with a mild driver, on a internally STOCK 8:1 4AGZE! The SC will always make more power than it uses, even if the returns are diminishing! Look as dragsters running 60-80psi of boost, no-one tells them that this is inefficient, and they should run 6psi The 'Teflon Seals' you mention is actually a teflon coating on the alluminium rotors to reduce clearances among other things. This has been known to burn off at high SC overdrive ratios. Beleive it or not most people who have 'burnt' this coating have been running faster SC speeds than me. My SC is doing about 10K at 7500rpm - this was my design target. I get so much boost because of increased SC displacement. Cheers, Nick. [Updated on: Fri, 14 October 2005 00:24] [Report message to a moderator]

	Subject	Poster	Date
	Wade 267° in my 18psi 4AGZE - help me with setup please!	nick.parker	Wed, 05 October 2005 00:55
	Re: Wade 267° in my 18psi 4AGZE - help me with setup please!	nick.parker	Wed, 05 October 2005 01:48
	Re: Wade 267° in my 18psi 4AGZE - help me with setup please!	mr2gze	Wed, 05 October 2005 02:38
	Re: Wade 267° in my 18psi 4AGZE - help me with setup please!	Ben Wilson	Wed, 05 October 2005 01:55
	Re: Wade 267° in my 18psi 4AGZE - help me with setup please!	nick.parker	Wed, 05 October 2005 02:42
	Re: Wade 267° in my 18psi 4AGZE - help me with setup please!	Ben Wilson	Wed, 05 October 2005 03:16
	Re: Wade 267° in my 18psi 4AGZE - help me with setup please!	nick.parker	Wed, 05 October 2005 05:19
	Re: Wade 267° in my 18psi 4AGZE - help me with setup please!	nick.parker	Wed, 05 October 2005 06:35
	Re: Wade 267° in my 18psi 4AGZE - help me with setup please!	improvedae86	Wed, 05 October 2005 05:58
	Re: Wade 267° in my 18psi 4AGZE - help me with setup please!	TE72_Turbo	Wed, 05 October 2005 14:07
	Re: Wade 267° in my 18psi 4AGZE - help me with setup please!	bpt-4w	Wed, 05 October 2005 14:25
	Re: Wade 267° in my 18psi 4AGZE - help me with setup please!	Ben Wilson	Wed, 05 October 2005 23:23
	Re: Wade 267° in my 18psi 4AGZE - help me with setup please!	nick.parker	Thu, 06 October 2005 02:13
	Re: Wade 267° in my 18psi 4AGZE - help me with setup please!	nick.parker	Thu, 13 October 2005 13:36
	Re: Wade 267° in my 18psi 4AGZE - help me with setup please!	oldcorollas	Thu, 13 October 2005 14:10
	Re: Wade 267° in my 18psi 4AGZE - help me with setup please!	myne	Thu, 13 October 2005 22:34
	Re: Wade 267° in my 18psi 4AGZE - help me with setup please!	nick.parker	Fri, 14 October 2005 00:18
	Re: Wade 267° in my 18psi 4AGZE - help me with setup please!	nick.parker	Fri, 14 October 2005 00:23

Previous Topic:	leaking sw20 MR2 T Top???
Next Topic:	GZ20 fuel filter

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.