| Author | Topic |
|---|
Location:
Melbourne
Registered:
September 2005
|
|
Re: 4A-GZE IDLE CONTROL LOOM WIRING
|
Fri, 14 October 2005 18:32
|
 |
| Ben Wilson wrote on Fri, 14 October 2005 08:08 |
It's a PITA to make work.
The E6A won't control a single wire idle motor either, so the Ford one is out (I tried it with my E6K, and it sucked anyway).
If you get a Camira one, you can get a housing from Haltech, then you have to fit hoses before and after your throttle body - This had teh advantage that the plug fits straight in, but, it isn't cheap. http://www.tweakit.net/shop/product_info.php?manuf acturers_id=10&products_id=192
I picked up a V6 Commodore throttle body and cut the idle motor part out of it and attached pipes for hoses to that, it isn't pretty, but, for $75 + a bit of work, I'm fairly happy with it.
|
i've asked haltech as well about it and they've told me to get a GM idle control motor to make it fit. the GZE has a very funny shaped idle control motor, so fabrication is quite impossible. it's like a square and a circle, never going to work. I might just leave it out and idle it higher (1000 RPM) so i won't need the idle control.
My mechanic says a different thing though, he's testing ways to amke the idle control motor fit because haltech's 4 wires have 2 positive and 2 earths.. but i'm not sure if he can pull it off.
will update when anything happens.
|
|
|
| | Subject | Poster | Date |
|---|
 |
4A-GZE IDLE CONTROL LOOM WIRING
|
TRD_07 | Thu, 13 October 2005 03:24 |
|
Re: 4A-GZE IDLE CONTROL LOOM WIRING
|
TRD_07 | Thu, 13 October 2005 03:44 |
|
Re: 4A-GZE IDLE CONTROL LOOM WIRING
|
oldcorollas | Thu, 13 October 2005 03:45 |
|
Re: 4A-GZE IDLE CONTROL LOOM WIRING
|
TRD_07 | Thu, 13 October 2005 03:47 |
|
Re: 4A-GZE IDLE CONTROL LOOM WIRING
|
oldcorollas | Thu, 13 October 2005 04:03 |
|
Re: 4A-GZE IDLE CONTROL LOOM WIRING
|
Henn | Thu, 13 October 2005 04:01 |
|
Re: 4A-GZE IDLE CONTROL LOOM WIRING
|
TRD_07 | Thu, 13 October 2005 04:17 |
|
Re: 4A-GZE IDLE CONTROL LOOM WIRING
|
TRD_07 | Thu, 13 October 2005 04:25 |
|
Re: 4A-GZE IDLE CONTROL LOOM WIRING
|
Ben Wilson | Thu, 13 October 2005 04:29 |
|
Re: 4A-GZE IDLE CONTROL LOOM WIRING
|
TRD_07 | Thu, 13 October 2005 04:37 |
|
Re: 4A-GZE IDLE CONTROL LOOM WIRING
|
TRD_07 | Thu, 13 October 2005 04:44 |
|
Re: 4A-GZE IDLE CONTROL LOOM WIRING
|
TRD_07 | Thu, 13 October 2005 10:30 |
|
Re: 4A-GZE IDLE CONTROL LOOM WIRING
|
oldcorollas | Thu, 13 October 2005 10:34 |
|
Re: 4A-GZE IDLE CONTROL LOOM WIRING
|
TRD_07 | Thu, 13 October 2005 12:58 |
|
Re: 4A-GZE IDLE CONTROL LOOM WIRING
|
Ben Wilson | Thu, 13 October 2005 22:08 |
|
Re: 4A-GZE IDLE CONTROL LOOM WIRING
|
TRD_07 | Fri, 14 October 2005 18:32 |
