| Author | Topic |
|---|
I Supported Toymods
Location:
Tamworth NSW
Registered:
December 2003
|
|
Re: Removing Valve springs
|
Wed, 19 October 2005 10:12
|
 |
I'am guessing they use buckets? and the stem of the valve is done within the casting?,
If so we use a DIY spring compressor which you can adjust the length and angle of the arm to suit the retainer then you yank on the end of it and use a magnet to grab the collets, put your hand over the spring if there really tight or they can spring out, it's happened to me a couple of times and they fly out anywhere.
Cheers Trent
|
|
|
| | Subject | Poster | Date |
|---|
 |
Removing Valve springs
|
domasik | Thu, 13 October 2005 11:00 |
|
Re: Removing Valve springs
|
oldcorollas | Thu, 13 October 2005 11:29 |
|
Re: Removing Valve springs
|
domasik | Thu, 13 October 2005 11:59 |
|
Re: Removing Valve springs
|
allencr | Thu, 13 October 2005 12:52 |
|
Re: Removing Valve springs
|
oldcorollas | Thu, 13 October 2005 13:07 |
|
Re: Removing Valve springs
|
domasik | Thu, 13 October 2005 21:32 |
|
Re: Removing Valve springs
|
takai | Thu, 13 October 2005 23:46 |
|
Re: Removing Valve springs
|
domasik | Fri, 14 October 2005 03:15 |
|
Re: Removing Valve springs
|
takai | Fri, 14 October 2005 03:26 |
|
Re: Removing Valve springs
|
domasik | Fri, 14 October 2005 04:12 |
|
Re: Removing Valve springs
|
Steve M | Sat, 15 October 2005 06:58 |
|
Re: Removing Valve springs
|
jeffro RA28 | Sat, 15 October 2005 07:13 |
|
Re: Removing Valve springs
|
domasik | Wed, 19 October 2005 00:02 |
|
Re: Removing Valve springs
|
wombat | Wed, 19 October 2005 10:07 |
|
Re: Removing Valve springs
|
Trent-KE30 | Wed, 19 October 2005 10:12 |
