| Author | Topic |
|---|
I supported Toymods
Location:
Frankston, Victoria
Registered:
April 2004
|
|
Re: Wires for 4AGE injectors..
|
Sun, 23 October 2005 02:44
 
|
 |
Temp sensor is at the front of the engine (JDM 96kW Bigport) and I believe it is getting a correct temp reading as there is coolant in there... I do however have a massive vacuum leak that I found yesterday, seems I didn't seal the intake manifold right when I put the TVIS back in. When putting my hand completely over the throttle body the engine still sits at 1000RPM hahaha...
At TDC the cam lines both line up with the head and the crank lines up at around 3 degrees to the left, not sure whether that's advanced or retarded.. But either way I think it should be at 0 degrees? I was told by a mechanic that anywhere up to 5 degrees offline at the crank should be fine anyway...
I think the most of my problem is due to that vacuum leak. I'll fix the leak and then I'll leave the radiator cap off next time I run my engine and see what happens. Will probably have a video if it still ain't workin right.
Thanks,
Kev.
|
|
|
