| Author | Topic |
|---|
Location:
Brisbane
Registered:
February 2003
|
|
Re: hilux + 1gge
|
Sun, 23 October 2005 05:06
 
|
 |
| Mookie wrote on Sun, 23 October 2005 01:59 |
i'm not sure where u live but it is where: u can't have forced induction or performance modded cars at all
|
this is why reading is important...
he's talking about 1G-GE - so not forced induction - and i dont think it counts as a 'performance mod'.
not having put a 1G into a hilux i'm only guessing, but it sounds like the target car has an 18R engine?
loom will be for the engine only - you'll have to integrate the charging system (e.g. charge light, alt light, IGN source for the alt), general power to the engine loom, and sensors for the dash (temp, tacho, oil-light, charge-light).
mount type will depend on where the steering control arm is an d what shape the cross member is - if it's like a RA40 you'll need a mid-rear sump. no idea about the spacer - what made you think this was needed?
radiator 'may' need to be moved, but if you change to thermo fans than all you'll have to do regarding the rad is ensuringthe in/outlet holes suit the engine.
you will have to look at the rear crossmember
it will require engineering, you'd changing to a 6cyl and converting to EFI.
help? read, research, re-read and re- research. and what ever budget you have will only be 50% of the end cost and it will tak 2-3 times as long as you plan/
good luck!
|
|
|
| | Subject | Poster | Date |
|---|
 |
hilux + 1gge
|
leroy-rn41 | Sat, 22 October 2005 12:48 |
|
Re: hilux + 1gge
|
Mookie | Sat, 22 October 2005 15:59 |
|
Re: hilux + 1gge
|
thechuckster | Sun, 23 October 2005 05:06 |
|
Re: hilux + 1gge
|
brett_celicacoupe | Sun, 23 October 2005 06:15 |
|
Re: hilux + 1gge
|
Mookie | Sun, 23 October 2005 07:52 |
|
Re: hilux + 1gge
|
toof | Sun, 23 October 2005 07:54 |
|
Re: hilux + 1gge
|
leroy-rn41 | Tue, 25 October 2005 10:57 |
|
Re: hilux + 1gge
|
leroy-rn41 | Tue, 25 October 2005 11:55 |
