| Author | Topic |
|---|
Location:
Perth, WA
Registered:
December 2004
|
|
Re: Speedo Correction
|
Tue, 25 October 2005 02:13
 
|
 |
rona, i dont need to know the circumferance man, i have learnt how to work out all that stuff already, of course i could jut grab a tape measure and walk into my garage where the rims are now sitting.
what i wanted to know was, how i could calculate the difference in the speedo readings between the two circumferances.
i.e. the difference seems to be about 10-12cm in circumferance, which should translate into a difference of about 10% or so in the speedo difference (i.e. the speedo will show a lower sped than what the cars actual speed is.
It doesnt matter now anyway, ive tried the rims on, the fronts fit perfectly, however, the back rims do not, since the sidewall bulges out a bit and hits the strut... ghey.
ive also found out the model number is the SVX10, and that camrys are 5x114.3 PCD.
Ill upload some pics in a few minutes.
Eldar.O.
|
|
|
| | Subject | Poster | Date |
|---|
 |
Speedo Correction
|
EldarO | Mon, 24 October 2005 15:34 |
|
Re: Speedo Correction
|
Corona RT142 | Mon, 24 October 2005 23:25 |
|
Re: Speedo Correction
|
EldarO | Tue, 25 October 2005 02:13 |
|
Re: Speedo Correction
|
EldarO | Tue, 25 October 2005 02:28 |
|
Re: Speedo Correction
|
WiLo | Tue, 25 October 2005 05:39 |
|
Re: Speedo Correction
|
havabeer | Tue, 25 October 2005 08:00 |
|
Re: Speedo Correction
|
EldarO | Tue, 25 October 2005 08:02 |
|
Re: Speedo Correction
|
WiLo | Tue, 25 October 2005 09:11 |
|
Re: Speedo Correction
|
toof | Tue, 25 October 2005 09:07 |
|
Re: Speedo Correction
|
dimmy77_03 | Tue, 25 October 2005 09:22 |
|
Re: Speedo Correction
|
WiLo | Tue, 25 October 2005 09:41 |
|
Re: Speedo Correction
|
Rona_Drifter | Tue, 25 October 2005 10:01 |
|
Re: Speedo Correction
|
smt_007 | Tue, 25 October 2005 10:35 |
|
Re: Speedo Correction
|
bathurst-91 | Tue, 25 October 2005 12:51 |
|
Re: Speedo Correction
|
EldarO | Tue, 25 October 2005 23:07 |
