F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » Blue Print Project FLYNSX 229.5kws at 22.8psi Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
FLYNSX Regular Location: Sydney Registered: May 2003	Re: Blue Print Project FLYNSX Thu, 27 October 2005 02:27 ed_ma61 wrote on Thu, 27 October 2005 10:59 9000 rpm? on 270's? and no porting? plus i didnt see any listing of new retainers or SUB... *ping* as for doing your research and finidng that shoot pinning rods are just as good as forged rods (are the stock rods cast??) i suggest you go to a different library good luck - we'll wait and see if you can blow the bonnet of the car agin with this one... the head is fully ported and polished from b4 there is a mr2 out there on standard big port rods shoot peen running 25psi everyday and he is doing 9sec quarter mile runs as for the 9000rpm at the end of the day its up to Dav Flood who is tuning the car to decide were to set rev limter 9000 would be nice but I will leave it up to him. UM and also i never blew the bonnet off the car either typical roumours as usual First time rebuilding motor from ground up sure it will be fine. I trust Brads judgement. [Report message to a moderator]

	Subject	Poster	Date
	Blue Print Project FLYNSX 229.5kws at 22.8psi	FLYNSX	Wed, 26 October 2005 08:31
	Re: Blue Print Project FLYNSX	STR8 2.8	Wed, 26 October 2005 10:01
	Re: Blue Print Project FLYNSX	pr1nce	Wed, 26 October 2005 10:12
	Re: Blue Print Project FLYNSX	kingmick	Wed, 26 October 2005 10:20
	Re: Blue Print Project FLYNSX	FLYNSX	Wed, 26 October 2005 11:21
	Re: Blue Print Project FLYNSX	oldcorollas	Wed, 26 October 2005 11:28
	Re: Blue Print Project FLYNSX	kingmick	Thu, 27 October 2005 08:02
	Re: Blue Print Project FLYNSX	Allan	Wed, 26 October 2005 12:17
	Re: Blue Print Project FLYNSX	EvilJack	Wed, 26 October 2005 12:46
	Re: Blue Print Project FLYNSX	stradlater	Wed, 26 October 2005 23:32
	Re: Blue Print Project FLYNSX	lumpy	Thu, 27 October 2005 00:48
	Re: Blue Print Project FLYNSX	ed_ma61	Thu, 27 October 2005 00:59
	Re: Blue Print Project FLYNSX	Corona RT142	Thu, 27 October 2005 01:03
	Re: Blue Print Project FLYNSX	FLYNSX	Thu, 27 October 2005 02:27
	Re: Blue Print Project FLYNSX	September_Squall	Thu, 27 October 2005 02:49
	Re: Blue Print Project FLYNSX	oldcorollas	Thu, 27 October 2005 02:56
	Re: Blue Print Project FLYNSX	September_Squall	Thu, 27 October 2005 02:52
	Re: Blue Print Project FLYNSX	Corona RT142	Thu, 27 October 2005 02:57
	Re: Blue Print Project FLYNSX	dimmy77_03	Thu, 27 October 2005 07:31
	Re: Blue Print Project FLYNSX	kingmick	Thu, 27 October 2005 07:51
	Re: Blue Print Project FLYNSX	dimmy77_03	Thu, 27 October 2005 08:16
	Re: Blue Print Project FLYNSX	go_the_datt	Thu, 27 October 2005 04:53
	Re: Blue Print Project FLYNSX	kingmick	Thu, 27 October 2005 10:12
	Re: Blue Print Project FLYNSX	4agte	Thu, 27 October 2005 12:19
	Re: Blue Print Project FLYNSX	FLYNSX	Thu, 27 October 2005 13:34
	Re: Blue Print Project FLYNSX	ed_ma61	Thu, 27 October 2005 13:38
	Re: Blue Print Project FLYNSX	oakmont	Thu, 27 October 2005 13:42
	Re: Blue Print Project FLYNSX	FLYNSX	Thu, 27 October 2005 14:00
	Re: Blue Print Project FLYNSX	oldcorollas	Thu, 27 October 2005 14:09
	Re: Blue Print Project FLYNSX	FLYNSX	Thu, 27 October 2005 14:27
	Re: Blue Print Project FLYNSX	oldcorollas	Thu, 27 October 2005 14:48
	Re: Blue Print Project FLYNSX	FLYNSX	Mon, 07 November 2005 13:09
	Re: Blue Print Project FLYNSX	September_Squall	Mon, 07 November 2005 13:39
	Re: Blue Print Project FLYNSX	insalubrity_macca	Mon, 07 November 2005 14:03
	Re: Blue Print Project FLYNSX 229.5kws at 22.8psi	THE WITZL	Tue, 08 November 2005 00:45
	Re: Blue Print Project FLYNSX 229.5kws at 22.8psi	FLYNSX	Tue, 08 November 2005 01:56
	Re: Blue Print Project FLYNSX 229.5kws at 22.8psi	EvilJack	Tue, 08 November 2005 03:11
	Re: Blue Print Project FLYNSX 229.5kws at 22.8psi	4agte	Tue, 08 November 2005 03:20
	Re: Blue Print Project FLYNSX 229.5kws at 22.8psi	ed_ma61	Tue, 08 November 2005 04:33
	Re: Blue Print Project FLYNSX 229.5kws at 22.8psi	riceburna73	Tue, 08 November 2005 05:37
	Re: Blue Print Project FLYNSX 229.5kws at 22.8psi	FLYNSX	Tue, 08 November 2005 06:12
	Re: Blue Print Project FLYNSX 229.5kws at 22.8psi	dimmy77_03	Tue, 08 November 2005 05:43
	Re: Blue Print Project FLYNSX 229.5kws at 22.8psi	oldcorollas	Tue, 08 November 2005 08:14
	Re: Blue Print Project FLYNSX 229.5kws at 22.8psi	TE72_Turbo	Tue, 08 November 2005 06:31
	Re: Blue Print Project FLYNSX 229.5kws at 22.8psi	MR PLOW	Tue, 08 November 2005 07:30
	Re: Blue Print Project FLYNSX 229.5kws at 22.8psi	THE WITZL	Tue, 08 November 2005 09:34
	Re: Blue Print Project FLYNSX 229.5kws at 22.8psi	Chris Davey	Tue, 08 November 2005 23:43
	Re: Blue Print Project FLYNSX 229.5kws at 22.8psi	dimmy77_03	Wed, 09 November 2005 00:09
	Re: Blue Print Project FLYNSX 229.5kws at 22.8psi	dimmy77_03	Wed, 09 November 2005 00:10
	Re: Blue Print Project FLYNSX 229.5kws at 22.8psi	CrAiGzEE	Wed, 09 November 2005 01:03
	Re: Blue Print Project FLYNSX 229.5kws at 22.8psi	FLYNSX	Wed, 09 November 2005 07:00

Previous Topic:	KE55 -> TA22 Pedal box + Hydraulic Clutch conversion
Next Topic:	KE10 Disc Conversion Questions

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.