| Author | Topic |
|---|
Location:
ACT
Registered:
April 2005
|
|
Re: Wiring 2jzge into 260z
|
Sat, 29 October 2005 06:50
 
|
 |
I have been looking at the wiring diagrams and it shouldnt be massively hard to wire it in, but i might just be lazy and get it done for me, just depends on how much time i have,
But before i start on the wiring harness i have a few problems that i probably should deal with first though,
Firstly my gauges, i dont really know how to deal with this, i figure that i cant use the Zed oil and water gauges unless i can somehow get the old L-Series sender units into the 2jz block, the only info i have on how this was done was something along the lines of "there is thankfully lots of holes to put the sender units from the L-Series into the 1jz engine" this was from the zoom article with the 1jz/240z, anyone got any ideas???
Secondly, not to sure about what to do with the speedo and tacho, ive been told my tacho wont work, but im not sure why?
And the speedo connection on the w58 box looks as if an electrical connection and not an old school cable, dont suppose you know of a way around this???
Thirdy, not to sure about what i should do with Radiator, i will have to use a thermofan as the stock engine fan looks as if it would have the chassis rail, but im thinking i might be able to just use the stock datto radiator and install a 16" thermo fan - do you guys think this will cool the 2jzge sufficently???
|
|
|
| | Subject | Poster | Date |
|---|
 |
Wiring 2jzge into 260z
|
aussie260z | Thu, 21 July 2005 02:24 |
|
Re: Wiring 2jzge into 260z
|
gianttomato | Thu, 21 July 2005 04:09 |
|
Re: Wiring 2jzge into 260z
|
Henn | Thu, 21 July 2005 05:39 |
|
Re: Wiring 2jzge into 260z
|
gianttomato | Thu, 21 July 2005 05:41 |
|
Re: Wiring 2jzge into 260z
|
Henn | Thu, 21 July 2005 06:48 |
|
Re: Wiring 2jzge into 260z
|
aussie260z | Sat, 29 October 2005 06:50 |
|
Re: Wiring 2jzge into 260z
|
gianttomato | Sat, 29 October 2005 07:07 |
|
Re: Wiring 2jzge into 260z
|
brett_celicacoupe | Sat, 29 October 2005 07:33 |
|
Re: Wiring 2jzge into 260z
|
aussie260z | Sat, 29 October 2005 23:41 |
|
Re: Wiring 2jzge into 260z
|
Manny | Sun, 30 October 2005 01:08 |
|
Re: Wiring 2jzge into 260z
|
aussie260z | Mon, 31 October 2005 04:58 |
|
Re: Wiring 2jzge into 260z
|
Manny | Mon, 31 October 2005 05:36 |
|
Re: Wiring 2jzge into 260z
|
gianttomato | Mon, 31 October 2005 07:34 |
|
Re: Wiring 2jzge into 260z
|
Alchemist | Mon, 31 October 2005 10:10 |
|
Re: Wiring 2jzge into 260z
|
aussie260z | Tue, 01 November 2005 04:59 |
|
Re: Wiring 2jzge into 260z
|
gianttomato | Tue, 01 November 2005 05:26 |
|
Re: Wiring 2jzge into 260z
|
sideshow | Tue, 01 November 2005 07:00 |
|
Re: Wiring 2jzge into 260z
|
aussie260z | Tue, 01 November 2005 22:38 |
|
Re: Wiring 2jzge into 260z
|
gianttomato | Wed, 02 November 2005 08:00 |
|
Re: Wiring 2jzge into 260z
|
aussie260z | Wed, 02 November 2005 22:01 |
|
Re: Wiring 2jzge into 260z
|
gianttomato | Fri, 04 November 2005 22:22 |
|
Re: Wiring 2jzge into 260z
|
aussie260z | Fri, 04 November 2005 23:04 |
|
Re: Wiring 2jzge into 260z
|
gianttomato | Fri, 04 November 2005 23:41 |
|
Re: Wiring 2jzge into 260z
|
aussie260z | Sat, 05 November 2005 02:31 |
|
Re: Wiring 2jzge into 260z
|
wilbo666 | Sat, 05 November 2005 03:12 |
|
Re: Wiring 2jzge into 260z
|
gianttomato | Sat, 05 November 2005 03:33 |
|
Re: Wiring 2jzge into 260z
|
wilbo666 | Sat, 05 November 2005 04:24 |
|
Re: Wiring 2jzge into 260z
|
Norbie | Fri, 11 November 2005 00:10 |
|
Re: Wiring 2jzge into 260z
|
mrshin | Sun, 06 November 2005 08:59 |
|
Re: Wiring 2jzge into 260z
|
aussie260z | Thu, 10 November 2005 23:46 |
