F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » cheap arse 1jz manual conversion-w5x Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
ae86slideways Regular Location: warrnambool VIC Registered: April 2004	cheap arse 1jz manual conversion-w5x Sat, 29 October 2005 23:32 Hi folks done lots of searching and the setups for the manual 1jz kit look to be....na 2jz bellhousing and flywheel etc,but seem hard to find cheap ..derrrr. im wondering who has had success with adapting a flywheel fom a 1g or 3sg etc ive got access to a machine shop and can get the flywheels balanced and re drilled as needed. also has anyone cut up a 1jz auto bellhousing and frankensteined it to a w58 housing or made up an adaptor plate? ive got a 1jzgte on the way to drop in my gz-10,and it has the flex plate still on so i can use this for dimensions,but im not sure of the best flywheel to adapt as far as ring gear size and crank flange mounting. p.s if the bellhousing cut and shut works i could get a few made up at one time pretty cheap.same with the flywheels. thanks for looking [Report message to a moderator]

	Subject	Poster	Date
	cheap arse 1jz manual conversion-w5x	ae86slideways	Sat, 29 October 2005 23:32
	Re: cheap arse 1jz manual conversion-w5x	BlackSupra	Sun, 30 October 2005 02:51
	Re: cheap arse 1jz manual conversion-w5x	gianttomato	Sun, 30 October 2005 05:18
	Re: cheap arse 1jz manual conversion-w5x	ae86slideways	Sun, 30 October 2005 06:04
	Re: cheap arse 1jz manual conversion-w5x	Norbie	Sun, 30 October 2005 08:03
	Re: cheap arse 1jz manual conversion-w5x	gianttomato	Sun, 30 October 2005 10:04
	Re: cheap arse 1jz manual conversion-w5x	oldcorollas	Sun, 30 October 2005 10:19
	Re: cheap arse 1jz manual conversion-w5x	petespipes	Sun, 30 October 2005 17:41
	Re: cheap arse 1jz manual conversion-w5x	ae86slideways	Mon, 31 October 2005 02:05
	Re: cheap arse 1jz manual conversion-w5x	ae86slideways	Mon, 31 October 2005 22:57

Previous Topic:	1GGTE Head Studs
Next Topic:	Taking glass out.. Ae82...HELP

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.