| Author | Topic |
|---|
Registered:
May 2002
|
|
Re: Wiring loom problems (3TGTE)
|
Wed, 19 February 2003 13:42
 
|
 |
ok, now i've changed my mind, the two injector wires, #10 and #20 are definately supposed to be bridged. If these are not bridged and the injectors are fired in two separate banks, the injector resistance WILL be too high for the computer, and it could shit itself, like mine did, now it has gone to heaven  . the total parrallel resitance would be about 1ohm instead of 0.5ohm with the 4x2ohm injectors, therefore it would be twice the normal voltage to the computer  .
I've spoken to a few people, looked at a few more wiring diagrams, it seems that all the injector negatives are wired together, this can be done with a single wire connecting #10 and #20, which connects to each individual injector, but the wiring diagram displays the wiring as it was wired from the factory, with injectors 1, 3 and 4 wired together then connected to 2 later down the wire.
Hence the wiring diagram is infact correct. Everyone wiring a 3TGTE computer should follow this exact
CLUBAGREENIE: yep just wired in the circuit open, and no i'm sure it only controls the fuel pump.
i'm thinking of having multiple earthing positions for the computer just to be sure. everyone whos wired a computer has said they had earthing problems.
I should be getting a new computer tommorrow, will try again with that.
EDIT: Thanks to everyone for their help, i've managed to wire the loom without seeking an auto electrians help.
[Updated on: Wed, 19 February 2003 13:55]
|
|
|
| | Subject | Poster | Date |
|---|
 |
Wiring loom problems (3TGTE)
|
inferno | Fri, 07 February 2003 00:43 |
|
Re: Wiring loom problems (3TGTE)
|
roger | Fri, 07 February 2003 01:00 |
|
Re: Wiring loom problems (3TGTE)
|
Norbie | Fri, 07 February 2003 01:07 |
|
Re: Wiring loom problems (3TGTE)
|
inferno | Sat, 08 February 2003 22:40 |
|
Re: Wiring loom problems (3TGTE)
|
CLG | Sun, 09 February 2003 04:13 |
|
Re: Wiring loom problems (3TGTE)
|
inferno | Sun, 09 February 2003 05:05 |
|
Re: Wiring loom problems (3TGTE)
|
CLG | Sun, 09 February 2003 09:56 |
|
Re: Wiring loom problems (3TGTE)
|
Grant | Sun, 09 February 2003 21:27 |
|
Re: Wiring loom problems (3TGTE)
|
inferno | Mon, 10 February 2003 22:32 |
|
Re: Wiring loom problems (3TGTE)
|
inferno | Tue, 11 February 2003 05:53 |
|
Re: Wiring loom problems (3TGTE)
|
roger | Wed, 12 February 2003 00:18 |
|
Re: Wiring loom problems (3TGTE)
|
inferno | Wed, 12 February 2003 00:37 |
|
Re: Wiring loom problems (3TGTE)
|
roger | Wed, 12 February 2003 01:08 |
|
Re: Wiring loom problems (3TGTE)
|
inferno | Tue, 18 February 2003 08:04 |
|
Re: Wiring loom problems (3TGTE)
|
clubagreenie | Tue, 18 February 2003 08:31 |
|
Re: Wiring loom problems (3TGTE)
|
inferno | Wed, 19 February 2003 13:42 |
|
Re: Wiring loom problems (3TGTE)
|
roger | Wed, 19 February 2003 22:05 |
|
Re: Wiring loom problems (3TGTE)
|
roger | Wed, 19 February 2003 22:12 |
|
Re: Wiring loom problems (3TGTE)
|
TurboRA28 | Wed, 19 February 2003 22:49 |
|
Re: Wiring loom problems (3TGTE)
|
inferno | Thu, 20 February 2003 00:18 |
|
Re: Wiring loom problems (3TGTE)
|
roger | Thu, 20 February 2003 02:39 |
|
Re: Wiring loom problems (3TGTE)
|
TurboRA28 | Thu, 20 February 2003 03:19 |
|
Re: Wiring loom problems (3TGTE)
|
roger | Thu, 20 February 2003 03:31 |
|
Re: Wiring loom problems (3TGTE)
|
inferno | Thu, 20 February 2003 04:13 |
|
Re: Wiring loom problems (3TGTE)
|
roger | Thu, 20 February 2003 04:51 |
|
Re: Wiring loom problems (3TGTE)
|
TurboRA28 | Thu, 20 February 2003 05:41 |
|
Re: Wiring loom problems (3TGTE)
|
inferno | Thu, 20 February 2003 08:09 |
|
Re: Wiring loom problems (3TGTE)
|
roger | Thu, 20 February 2003 21:33 |
|
Re: Wiring loom problems (3TGTE)
|
TurboRA28 | Thu, 20 February 2003 22:06 |
|
Re: Wiring loom problems (3TGTE)
|
inferno | Thu, 20 February 2003 23:11 |
|
Re: Wiring loom problems (3TGTE)
|
roger | Thu, 20 February 2003 23:35 |
|
Re: Wiring loom problems (3TGTE)
|
CLG | Fri, 21 February 2003 04:46 |
|
Re: Wiring loom problems (3TGTE)
|
inferno | Fri, 21 February 2003 14:02 |
|
Re: Wiring loom problems (3TGTE)
|
AE25 | Wed, 04 May 2005 09:22 |
