F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » My idle problem Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
mic* Regular Location: Brisbane Registered: July 2005	Re: My idle problem Mon, 31 October 2005 02:37 It is AFM... That is what i initially thought. Leak between AFM and inlet. Have searched and cant find one. (maybe if someone can tell me what each line i would expect to have R & R'ed is for i would be in a better position to check em off - there is a few lines i couldn work out what they be for - but everyhting is back where it came from so??? Interestingly, i have had a small leak before where the inlet track goes over the tappet cover. I put a hole in there to test my water injection setup. It was sucking air in through a gap for a while coz i didn realise the injector had become dislodged from the hole. When this was happening, i did not notice any idle issues or anything else. What do you mean by adjusting the TPS? I thought it was just basically a variable resistor that was physically connected to the shaft for the (throttle) butterfly so as it moved resistance changes. I thought they were either good or gone. [Report message to a moderator]

	Subject	Poster	Date
	My idle problem	mic*	Mon, 31 October 2005 01:53
	Re: My idle problem	4agte	Mon, 31 October 2005 02:10
	Re: My idle problem	mic*	Mon, 31 October 2005 02:37
	Re: My idle problem	4agte	Mon, 31 October 2005 04:16
	Re: My idle problem	mic*	Mon, 31 October 2005 05:07
	Re: My idle problem	4agte	Mon, 31 October 2005 05:17
	Re: My idle problem	mic*	Mon, 31 October 2005 05:30
	Re: My idle problem	TurboRA28	Mon, 31 October 2005 06:10
	Re: My idle problem	mic*	Mon, 31 October 2005 06:15
	Re: My idle problem	Henn	Mon, 31 October 2005 13:07
	Re: My idle problem	mic*	Tue, 01 November 2005 08:35
	Re: My idle problem	michaelhaynes110	Tue, 01 November 2005 09:05
	Re: My idle problem	mic*	Tue, 01 November 2005 22:21
	Re: My idle problem	michaelhaynes110	Wed, 02 November 2005 09:15
	Re: My idle problem	mic*	Fri, 04 November 2005 02:30
	Re: My idle problem	mic*	Sun, 06 November 2005 23:59

Previous Topic:	2T-G head bolts`
Next Topic:	not idling

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.