F.A.Q.    Register    Login    Home Members    Search

Toymods » General Car Talk » Settings for traction brackets AE86 Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
170bhp Regular Registered: January 2004	Re: Settings for traction brackets AE86 Mon, 31 October 2005 21:53 oldcorollas I too don't want a sh&tfight, I actually think the problem here is the difference between traction brackets, the ones I have have many different holes to put the lower arms into and they are on a slight arc, so If I lower my car and the diff pinion starts to tilt down, I can select from the many holes the one required to get the pinion angle correct, thus I don't need adj lower arms(even though I have them, but the main reason for getting these was fine tuning the rear end alignment and for the rod ends), my traction brackets are not like the whiteline one hole only type! So basically by fitting my traction brackets I have restord my pinion angle and I can use non adj to do this if I want(infact for many years I ran non adj arms and pinion angle was corrrect), by longer upper arms I mean I am running the same length arms top and bottom, I no longer have the short top arms, on a lowered car the shorter top arms exagerate the pinion anlge change as the car is lowered. When I said I didn't want to wind out my arms that much, not beacuase they are too short, so they don't run out of thread! Also your last comment I'm saying that once the car is lowered and the pinion angle has changed(nose down) fitting my traction brackets with the standard arms DID greatly change the pinion angle, back to original, so I don't see where the contradiction is??? also I'm not sure how you worked out my new pinion angle was weird???? if the car is lowered and the nose points down then I fit traction brackets with standard arms(which I did for many years) and the pinion angle is lifted back to stock.....wheres the weird angle??? yes they are bodgy but I suppose they are a bolt on fix to correcting the pinion angle without having to go to adj arms.I fitted same length top and bottom so I don't have two arms going through different arcs! [Report message to a moderator]

	Subject	Poster	Date
	Settings for traction brackets AE86	Evan	Sat, 29 October 2005 00:29
	Re: Settings for traction brackets AE86	oldcorollas	Sat, 29 October 2005 05:00
	Re: Settings for traction brackets AE86	ae86drift	Sat, 29 October 2005 06:31
	Re: Settings for traction brackets AE86	oldcorollas	Sat, 29 October 2005 08:52
	Re: Settings for traction brackets AE86	Evan	Sat, 29 October 2005 09:41
	Re: Settings for traction brackets AE86	oldcorollas	Sat, 29 October 2005 10:00
	Re: Settings for traction brackets AE86	ae86drift	Sat, 29 October 2005 14:42
	Re: Settings for traction brackets AE86	oldcorollas	Sun, 30 October 2005 01:46
	Re: Settings for traction brackets AE86	ae86drift	Sun, 30 October 2005 01:51
	Re: Settings for traction brackets AE86	oldcorollas	Sun, 30 October 2005 02:07
	Re: Settings for traction brackets AE86	ehendrikd	Sun, 30 October 2005 02:11
	Re: Settings for traction brackets AE86	AE86slut	Mon, 31 October 2005 23:26
	Re: Settings for traction brackets AE86	oldcorollas	Tue, 01 November 2005 03:54
	Re: Settings for traction brackets AE86	AE86slut	Tue, 01 November 2005 04:22
	Re: Settings for traction brackets AE86	Evan	Sat, 29 October 2005 09:31
	Re: Settings for traction brackets AE86	170bhp	Mon, 31 October 2005 02:16
	Re: Settings for traction brackets AE86	oldcorollas	Mon, 31 October 2005 02:28
	Re: Settings for traction brackets AE86	170bhp	Mon, 31 October 2005 08:23
	Re: Settings for traction brackets AE86	oldcorollas	Mon, 31 October 2005 09:58
	Re: Settings for traction brackets AE86	kingmick	Mon, 31 October 2005 09:35
	Re: Settings for traction brackets AE86	Bill Sherwood	Mon, 31 October 2005 13:06
	Re: Settings for traction brackets AE86	Blown86	Mon, 31 October 2005 09:46
	Re: Settings for traction brackets AE86	bluehachi	Mon, 31 October 2005 12:07
	Re: Settings for traction brackets AE86	170bhp	Mon, 31 October 2005 21:53
	Re: Settings for traction brackets AE86	170bhp	Tue, 01 November 2005 01:31
	Re: Settings for traction brackets AE86	Evan	Tue, 01 November 2005 03:27
	Re: Settings for traction brackets AE86	170bhp	Tue, 01 November 2005 04:03
	Re: Settings for traction brackets AE86	cannonball	Tue, 01 November 2005 04:52
	Re: Settings for traction brackets AE86	oldcorollas	Tue, 01 November 2005 05:05
	Re: Settings for traction brackets AE86	AE86slut	Tue, 01 November 2005 05:20
	Re: Settings for traction brackets AE86	oldcorollas	Tue, 01 November 2005 07:50
	Re: Settings for traction brackets AE86	Corona RT142	Wed, 02 November 2005 01:32
	Re: Settings for traction brackets AE86	kingmick	Tue, 01 November 2005 06:26
	Re: Settings for traction brackets AE86	cannonball	Tue, 01 November 2005 05:21
	Re: Settings for traction brackets AE86	170bhp	Tue, 01 November 2005 05:51
	Re: Settings for traction brackets AE86	Evan	Tue, 01 November 2005 05:57
	Re: Settings for traction brackets AE86	oldcorollas	Tue, 01 November 2005 08:23
	Re: Settings for traction brackets AE86	Evan	Wed, 02 November 2005 03:42
	Re: Settings for traction brackets AE86	cannonball	Tue, 01 November 2005 05:58
	Re: Settings for traction brackets AE86	170bhp	Tue, 01 November 2005 06:11
	Re: Settings for traction brackets AE86	170bhp	Tue, 01 November 2005 10:39
	Re: Settings for traction brackets AE86	bluehachi	Tue, 01 November 2005 11:59
	Re: Settings for traction brackets AE86	oldcorollas	Tue, 01 November 2005 14:49
	Re: Settings for traction brackets AE86	fOOZ86	Wed, 02 November 2005 02:01
	Re: Settings for traction brackets AE86	Corona RT142	Wed, 02 November 2005 02:09
	Re: Settings for traction brackets AE86	pro_k	Wed, 02 November 2005 03:36
	Re: Settings for traction brackets AE86	Evan	Wed, 02 November 2005 03:46
	Re: Settings for traction brackets AE86	170bhp	Wed, 02 November 2005 04:40
	Re: Settings for traction brackets AE86	Dorio86	Mon, 07 November 2005 05:09

Previous Topic:	To Buy or Not To Buy
Next Topic:	dyno sheets!

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.