F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » T series crossmember dimensions Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
Purple_Beasty Regular Location: New Zealand Registered: May 2002	Re: T series crossmember dimensions Fri, 04 November 2005 04:08 NAMDAMAMI wrote on Sat, 04 June 2005 04:04 Cross-member measurements as follows: Transverse distance between rear chassis leg bolt holes = AE86 760mm / TA22 705mm (27.5mm out either side) Transverse distance between front chassis leg bolt holes = AE86 775mm / TA22 726.6 (24.3mm out either side) Longitudinal distance between front & rear holes = AE86 140mm / TA22 114mm (13mm out) Note that TA22 measurments taken from Toyota repair manual, AE86 measurments taken by me with tape (so approximate). Found that in another post, too hard to measure mine accurately with the engine in. Callum [Report message to a moderator]

	Subject	Poster	Date
	T series crossmember dimensions	jesseT18	Thu, 03 November 2005 06:33
	Re: T series crossmember dimensions	Grega	Thu, 03 November 2005 08:40
	Re: T series crossmember dimensions	Purple_Beasty	Fri, 04 November 2005 04:08

Previous Topic:	RA23 Intercooler
Next Topic:	air con not engaging

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.