F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » Voltage question, with ignition on. Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
Maurice c Regular Location: Canberra Registered: February 2004	Re: Voltage question, with ignition on. Fri, 04 November 2005 17:06 Bit more to this story guys, i'm using a Ford Fairlane 60 amp bosch that I got in the wreckers, that looked about right. Didnt take too much effort to put in and gets rid of that old external regulator. It went pretty good for a while but when you buy second hand it might last a day or a year. Even at 5000 revs the voltage might drop as low as 13.0 measured on a muiltimeter not on the dash out of wack scale. The car is a ra40 with a 18r-c fitted. I'll measure the amp draw at idle and see if theres a draw in the ignition circuit. Its gives about 13.9 at idle untiln it warms up and then it drops to 13.6 or even 13 flat. Its not too easy to get out because I had to change a lot to make it fit in the first place. I think when it heats the diodes mess up and drop one or two of the fields. ( I think that theres three in a bosch alternator). Anybody got any ideas? [Report message to a moderator]

	Subject	Poster	Date
	Voltage question, with ignition on.	Maurice c	Fri, 04 November 2005 03:29
	Re: Voltage question, with ignition on.	NeoNasty	Fri, 04 November 2005 05:41
	Re: Voltage question, with ignition on.	mic*	Fri, 04 November 2005 05:47
	Re: Voltage question, with ignition on.	BradW	Fri, 04 November 2005 09:46
	Re: Voltage question, with ignition on.	o_man_ra23	Fri, 04 November 2005 10:09
	Re: Voltage question, with ignition on.	Maurice c	Fri, 04 November 2005 17:06
	Re: Voltage question, with ignition on.	Maurice c	Sun, 06 November 2005 13:57
	Re: Voltage question, with ignition on.	mic*	Sun, 06 November 2005 22:40
	Re: Voltage question, with ignition on.	o_man_ra23	Sun, 06 November 2005 23:15
	Re: Voltage question, with ignition on.	Phrostbyte	Sun, 06 November 2005 23:49
	Re: Voltage question, with ignition on.	Maurice c	Mon, 07 November 2005 02:41
	Re: Voltage question, with ignition on.	Maurice c	Tue, 08 November 2005 15:51
	Re: Voltage question, with ignition on.	Maurice c	Thu, 08 December 2005 16:58
	Re: Voltage question, with ignition on.	mic*	Fri, 09 December 2005 03:08
	Re: Voltage question, with ignition on.	Maurice c	Sun, 11 December 2005 18:09
	Re: Voltage question, with ignition on.	chrisss	Mon, 12 December 2005 00:51

Previous Topic:	gze questions
Next Topic:	4AGE Ecu's, how much can they compensate?

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.