F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » Wiring loom problems (3TGTE) Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
roger Regular Registered: June 2002	Re: Wiring loom problems (3TGTE) Thu, 20 February 2003 23:35 I would still get one flowed to be sure they are around 290cc. They may well be 3tgteu injectors but in all my experice with the 3tgteu I have never seen a low impedence injector. Alot of people replace the injectors in 3tgts because they are only good for 200hp at the fly wheel. You may have larger ones which is great but if lower than 290cc then you may need to change them if used in a turbo application as TurboRA28 said you do not want to lean out under boost and the standard 290cc doesn't leave much room to play with and 200cc just wont do. By the way the only changes that I am of aware of with the 3tgteu is the change from an oil cooled turbo to a water cooled turbo. Roger [Updated on: Thu, 20 February 2003 23:46] [Report message to a moderator]

	Subject	Poster	Date
	Wiring loom problems (3TGTE)	inferno	Fri, 07 February 2003 00:43
	Re: Wiring loom problems (3TGTE)	roger	Fri, 07 February 2003 01:00
	Re: Wiring loom problems (3TGTE)	Norbie	Fri, 07 February 2003 01:07
	Re: Wiring loom problems (3TGTE)	inferno	Sat, 08 February 2003 22:40
	Re: Wiring loom problems (3TGTE)	CLG	Sun, 09 February 2003 04:13
	Re: Wiring loom problems (3TGTE)	inferno	Sun, 09 February 2003 05:05
	Re: Wiring loom problems (3TGTE)	CLG	Sun, 09 February 2003 09:56
	Re: Wiring loom problems (3TGTE)	Grant	Sun, 09 February 2003 21:27
	Re: Wiring loom problems (3TGTE)	inferno	Mon, 10 February 2003 22:32
	Re: Wiring loom problems (3TGTE)	inferno	Tue, 11 February 2003 05:53
	Re: Wiring loom problems (3TGTE)	roger	Wed, 12 February 2003 00:18
	Re: Wiring loom problems (3TGTE)	inferno	Wed, 12 February 2003 00:37
	Re: Wiring loom problems (3TGTE)	roger	Wed, 12 February 2003 01:08
	Re: Wiring loom problems (3TGTE)	inferno	Tue, 18 February 2003 08:04
	Re: Wiring loom problems (3TGTE)	clubagreenie	Tue, 18 February 2003 08:31
	Re: Wiring loom problems (3TGTE)	inferno	Wed, 19 February 2003 13:42
	Re: Wiring loom problems (3TGTE)	roger	Wed, 19 February 2003 22:05
	Re: Wiring loom problems (3TGTE)	roger	Wed, 19 February 2003 22:12
	Re: Wiring loom problems (3TGTE)	TurboRA28	Wed, 19 February 2003 22:49
	Re: Wiring loom problems (3TGTE)	inferno	Thu, 20 February 2003 00:18
	Re: Wiring loom problems (3TGTE)	roger	Thu, 20 February 2003 02:39
	Re: Wiring loom problems (3TGTE)	TurboRA28	Thu, 20 February 2003 03:19
	Re: Wiring loom problems (3TGTE)	roger	Thu, 20 February 2003 03:31
	Re: Wiring loom problems (3TGTE)	inferno	Thu, 20 February 2003 04:13
	Re: Wiring loom problems (3TGTE)	roger	Thu, 20 February 2003 04:51
	Re: Wiring loom problems (3TGTE)	TurboRA28	Thu, 20 February 2003 05:41
	Re: Wiring loom problems (3TGTE)	inferno	Thu, 20 February 2003 08:09
	Re: Wiring loom problems (3TGTE)	roger	Thu, 20 February 2003 21:33
	Re: Wiring loom problems (3TGTE)	TurboRA28	Thu, 20 February 2003 22:06
	Re: Wiring loom problems (3TGTE)	inferno	Thu, 20 February 2003 23:11
	Re: Wiring loom problems (3TGTE)	roger	Thu, 20 February 2003 23:35
	Re: Wiring loom problems (3TGTE)	CLG	Fri, 21 February 2003 04:46
	Re: Wiring loom problems (3TGTE)	inferno	Fri, 21 February 2003 14:02
	Re: Wiring loom problems (3TGTE)	AE25	Wed, 04 May 2005 09:22

Previous Topic:	Greddy Profec B Spec II Tuners in Canberra
Next Topic:	2tg piston hits valve after hibread makeover

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.