| Author | Topic |
|---|
Location:
western queensland
Registered:
September 2004
|
|
Re: 3sgte cambelt timing marks?
|
Sun, 06 November 2005 06:11
 
|
 |
|
there is a groove in the cam and a hole in behind the gear, line these up with cover off the put the wheel on with the 'S' up as straight as poss. and put in the dowel to the most lined up hole both cams if you have your backing plate on there is two dents about 10mm long going up/down pressed into the backing plate above where the 's' marks should be, then you turn the cams to these marks and the dot on the gear, and make it match the belt gooves as best you can, thats how i did it?
|
|
|
