| Author | Topic |
|---|
Location:
perth
Registered:
October 2004
|
|
Re: 3tgte ecu for 2tgte and knock control Q
|
Mon, 07 November 2005 06:53
 
|
 |
ok great cheers for your help bunkyt18.
is it possible to run 3tgte cams in a 2tgeu head? if so that could make it a little easier on the stock 3tgte ecu.
i might have a look at modifying the 3tgte dizzy internals to fit the 2tgeu body and shaft. i have a 3tc dizzy i can chop apart for the bits needed so i dont kill the 2tgeu dizzy. possibly the same way as "nickz" did it with the 20V cas --> 2tgeu dizzy body + shaft. this is prolly the way ill do it later down the track for aftermarket ecu and use a 20V cas.
will have a scope when i get back to perth to finally see the 3tgte this weekend.
if i have ne more questions ill post em
cheers
craig
|
|
|
