| Author | Topic |
|---|
Location:
Brisbane
Registered:
May 2002
|
|
Re: Q's on 5 stud conversion
|
Wed, 09 November 2005 02:02
 
|
 |
| gianttomato wrote on Sat, 29 October 2005 16:47 |
Also you guys should be checking old Dattos, like 260C and similar. Hilux 2WD and Hiace also good to check too.
|
Yep, as thechuckster said; been exploring that, with not a whole amount of love yet  260z's share the same bearings, but not 5 stud. Apparently 260c = no go either.
A think to mention about norbies is his wheel offset pics. He has quite a bit of wheel / strut room to play with this his 17x8's +25's...I was going to look into the possibility of using rims with a higher offset (+35's; same rim dimensions) and a slightly longer lower control arm to try and get an acceptable arrangement...Norbie, car to comment on the possibility?!
Obviously the idea is to use the longer LCA to get camber back to normal, and the higher wheel offset to get the wheel back inside the guard. Not sure if 10-20mm will be enough however, which is what I will look into.
Cheers
Wilbo
|
|
|
| | Subject | Poster | Date |
|---|
 |
Q's on 5 stud conversion
|
maiku | Tue, 25 October 2005 23:54 |
|
Re: Q's on 5 stud conversion
|
CrUZsida | Wed, 26 October 2005 01:52 |
|
Re: Q's on 5 stud conversion
|
Allan | Wed, 26 October 2005 12:28 |
|
Re: Q's on 5 stud conversion
|
thechuckster | Wed, 26 October 2005 12:35 |
|
Re: Q's on 5 stud conversion
|
Allan | Wed, 26 October 2005 20:31 |
|
Re: Q's on 5 stud conversion
|
Norbie | Thu, 27 October 2005 12:39 |
|
Re: Q's on 5 stud conversion
|
Allan | Thu, 27 October 2005 13:51 |
|
Re: Q's on 5 stud conversion
|
thechuckster | Thu, 27 October 2005 14:25 |
|
Re: Q's on 5 stud conversion
|
Allan | Thu, 27 October 2005 20:31 |
|
Re: Q's on 5 stud conversion
|
gianttomato | Thu, 27 October 2005 22:16 |
|
Re: Q's on 5 stud conversion
|
barned01 | Fri, 28 October 2005 01:39 |
|
Re: Q's on 5 stud conversion
|
barned01 | Fri, 28 October 2005 01:34 |
|
Re: Q's on 5 stud conversion
|
thechuckster | Fri, 28 October 2005 09:28 |
|
Re: Q's on 5 stud conversion
|
Allan | Fri, 28 October 2005 08:51 |
|
Re: Q's on 5 stud conversion
|
Allan | Fri, 28 October 2005 09:35 |
|
Re: Q's on 5 stud conversion
|
thechuckster | Fri, 28 October 2005 09:55 |
|
Re: Q's on 5 stud conversion
|
Allan | Fri, 28 October 2005 10:12 |
|
Re: Q's on 5 stud conversion
|
brett_celicacoupe | Fri, 28 October 2005 11:32 |
|
Re: Q's on 5 stud conversion
|
Allan | Fri, 28 October 2005 11:38 |
|
Re: Q's on 5 stud conversion
|
CrUZsida | Fri, 28 October 2005 14:08 |
|
Re: Q's on 5 stud conversion
|
Allan | Fri, 28 October 2005 15:03 |
|
Re: Q's on 5 stud conversion
|
thechuckster | Fri, 28 October 2005 23:55 |
|
Re: Q's on 5 stud conversion
|
brett_celicacoupe | Sat, 29 October 2005 06:43 |
|
Re: Q's on 5 stud conversion
|
gianttomato | Sat, 29 October 2005 06:47 |
|
Re: Q's on 5 stud conversion
|
thechuckster | Sat, 29 October 2005 10:03 |
|
Re: Q's on 5 stud conversion
|
Norbie | Sun, 30 October 2005 07:51 |
|
Re: Q's on 5 stud conversion
|
wilbo666 | Wed, 09 November 2005 02:02 |
|
Re: Q's on 5 stud conversion
|
Allan | Sat, 29 October 2005 02:01 |
|
Re: Q's on 5 stud conversion
|
RA65 Sleeka | Sat, 29 October 2005 02:07 |
|
Re: Q's on 5 stud conversion
|
maiku | Wed, 09 November 2005 01:28 |
|
Re: Q's on 5 stud conversion
|
Norbie | Thu, 10 November 2005 02:07 |
