| Author | Topic |
|---|
Location:
brisbane
Registered:
September 2005
|
|
Re: Firing problems?? 4K-C
|
Thu, 10 November 2005 08:30
 
|
 |
hey dude, im not phrostbyte but i can tell u where the vac advance goes.
just take a long vac pipe from the advance (obviously) and run it to the other side of the carbo (other side is far side from vac advance) and there is about 5 little inlets that go into the carb, just use one of those.
this is basically wat the diagram only it used the same inlet to the carb to feed a few other things so the vac advance doesnt definately work very well, this way it works no dramas 
|
|
|
| | Subject | Poster | Date |
|---|
 |
Firing problems?? 4K-C
|
Black_KE70 | Mon, 07 November 2005 11:28 |
|
Re: Firing problems?? 4K-C
|
andylaurel | Tue, 08 November 2005 00:10 |
|
Re: Firing problems?? 4K-C
|
Phrostbyte | Tue, 08 November 2005 00:18 |
|
Re: Firing problems?? 4K-C
|
beige_bandit | Tue, 08 November 2005 00:20 |
|
Re: Firing problems?? 4K-C
|
beige_bandit | Tue, 08 November 2005 00:23 |
|
Re: Firing problems?? 4K-C
|
Phrostbyte | Tue, 08 November 2005 00:59 |
|
Re: Firing problems?? 4K-C
|
beige_bandit | Tue, 08 November 2005 04:01 |
|
Re: Firing problems?? 4K-C
|
Phrostbyte | Tue, 08 November 2005 04:33 |
|
Re: Firing problems?? 4K-C
|
beige_bandit | Tue, 08 November 2005 04:39 |
|
Re: Firing problems?? 4K-C
|
Black_KE70 | Thu, 10 November 2005 08:01 |
|
Re: Firing problems?? 4K-C
|
love ke70 | Thu, 10 November 2005 08:30 |
|
Re: Firing problems?? 4K-C
|
love ke70 | Thu, 10 November 2005 09:50 |
