| Author | Topic |
|---|
Location:
adelaide
Registered:
November 2005
|
|
Re: specs for 1G-GTE or 1G-GZE pistons & rods wanted
|
Wed, 16 November 2005 12:57
 
|
 |
Hi,
I found a reference on the web that said the 1G pistons and rods may fit into a toyota 4K 1300... the bore is the same at 75mm, and the stroke is only 2mm longer at 75mm, and the cylinder volume is almost the same.... so it may be close.
I run a supercharged 4K (at 15 lbs boost) in a clubman car and the standard pistons skirts crack etc.
If you can please measure the pin diam. (probably around 18,19,or 20mm) , the height from the pin centre to the top of the piston (probably around 34 to 37mm), the bigend diam. and the length of the rod centre to centre.
Thanks for your help mate,
regards, Kevin.
|
|
|
