Location: Somewhere on a dirt bowl ...
Registered: August 2004
Re: lowering blocks
Wed, 16 November 2005 13:11
It depends on how tall the blocks are. The higher the block the chance of axle twist, which leads to the need for tramp bars (aka slapper bars) and from a safety side of things the suspension (leaves, u-bolts, tramp bars etc) should be above the rims.
From memory 2inches is the tallest blocks you can legally use. And it must be a one peice unit each side. You can't use two 1" blocks to make a 2" lowering block.
Wed, 16 November 2005 13:11
