Toymods Car Club Inc: Tech & Conversions => Urgent help 4age Ae92 100kw tuning

Toymods Car Club
www.toymods.org.au

F.A.Q.

Home

Members

Toymods » Tech & Conversions » Urgent help 4age Ae92 100kw tuning Show: Today's Posts :: Show Polls Email to friend

Author

Topic

ae86drift
Forums Junkie

I supported Toymods

Location:
sydney.au
Registered:
August 2002

Re: Urgent help 4age Ae92 100kw tuning

Fri, 18 November 2005 01:18

taken from billzilla.org

Quote:

Cams up around the 310° mark, with 0.360"/9.1mm lift are needed. You'll also have to start thinking about getting some 'shim under' buckets, which have the valve clearance adjusting shims as a small 13mm pellet shim, rather than the 25mm dia shim that sits on top of the cam buckets. This is because with cams bigger than the low 300's and roughly 8mm lift, the 'shim over' buckets will occasionally catch the edge of the shim with the top of the lobe of the cam and spit it out the side, thus RAPIDLY destroying the bucket and most likely a fair chunk of head in the next few milliseconds. The shim under kits can be obtained from TRD at hideous expense, or from other racing shops for (merely!) large amounts of money.

maybe ull be safe evan with the cams you've chosen Smile

[Report message to a moderator]

[Message index]

-=] Back to Top [=-

Current Time: Sun Jul 20 20:13:40 UTC 2025

Total time taken to generate the page: 0.0037569999694824 seconds

.:: Contact :: Home ::.