F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » oil feed turbo Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
Lukass Occasional Poster Location: Brisbane Registered: July 2005	Re: oil feed turbo Sun, 20 November 2005 09:39 berad wrote on Sun, 20 November 2005 20:18 yer i know it has a restrictor i doubt u can blow air into it as yer your not gunna be able to move the oil so u can blow the air through i was just asking dont wanna hurt it haha.. What oil are you blowing through? Like I said the drain should be above the oil level so you should be able to blow freely into the sump. Even if it is below the oil level you could still easily blow bubbles. If you can't blow into the sump then your breather is blocked and this is really going to blow (pun intended) when it pressurises and pushes your oil out past the seals. [Report message to a moderator]

	Subject	Poster	Date
	oil feed turbo	berad	Sun, 20 November 2005 07:36
	Re: oil feed turbo	Aust162	Sun, 20 November 2005 08:33
	Re: oil feed turbo	Lukass	Sun, 20 November 2005 08:43
	Re: oil feed turbo	berad	Sun, 20 November 2005 09:18
	Re: oil feed turbo	Lukass	Sun, 20 November 2005 09:39
	Re: oil feed turbo	mrshin	Sun, 20 November 2005 09:45
	Re: oil feed turbo	berad	Sun, 20 November 2005 10:00
	Re: oil feed turbo	berad	Sun, 20 November 2005 10:02
	Re: oil feed turbo	feral4mr2	Tue, 22 November 2005 03:48
	Re: oil feed turbo	Mr DOHC	Tue, 22 November 2005 04:52
	Re: oil feed turbo	berad	Wed, 23 November 2005 07:51

Previous Topic:	!HELP! - ECU LOCATION AE112
Next Topic:	heat proof materials

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.