| Author | Topic |
|---|
Location:
Kita-Ku, Sapporo, Japan
Registered:
January 2003
|
|
Re: timing problem, ignition timing at bottom dead centre???
|
Sun, 20 November 2005 15:16
 
|
 |
use cyl 2 or 3 ignition wire for signal ....
this is assuming the car actually runs...
180deg cam timing is 360 deg crank timing 
so 90deg out on cam/dizzy = 180deg on crankshaft = timing makr in correct position
|
|
|
| | Subject | Poster | Date |
|---|
 |
timing problem, ignition timing at bottom dead centre???
|
Gwaijaitat | Sun, 20 November 2005 13:06 |
|
Re: timing problem, ignition timing at bottom dead centre???
|
wilbo666 | Sun, 20 November 2005 14:04 |
|
Re: timing problem, ignition timing at bottom dead centre???
|
oldcorollas | Sun, 20 November 2005 15:16 |
|
Re: timing problem, ignition timing at bottom dead centre???
|
xolent | Sun, 20 November 2005 15:26 |
|
Re: timing problem, ignition timing at bottom dead centre???
|
Gwaijaitat | Sun, 20 November 2005 22:49 |
|
Re: timing problem, ignition timing at bottom dead centre???
|
Gwaijaitat | Sun, 20 November 2005 23:06 |
|
Re: timing problem, ignition timing at bottom dead centre???
|
oldcorollas | Mon, 21 November 2005 00:37 |
