F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » timing problem, ignition timing at bottom dead centre??? Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
Gwaijaitat Regular Location: Sydney Registered: April 2005	Re: timing problem, ignition timing at bottom dead centre??? Sun, 20 November 2005 23:06 and I think the cam and crank marks are well representing themself correctly , when I rotate the crank to TDC mark the marks on the cam pulley lined up correctlly like the service manuel(one mark on top of each pulley, one mark facing towards another pulley), when I pull the dizzy out the groove on the cam for the dizzy is vertical which means it isn't 90 degree out. By the way it is a silver top 20v with coils and ignitor for ignition, the dizzy is working as crank angle sensor. Would it be the amount I set the dwell for the coils be a matter? I set 4.5 for my HEC715s. [Report message to a moderator]

	Subject	Poster	Date
	timing problem, ignition timing at bottom dead centre???	Gwaijaitat	Sun, 20 November 2005 13:06
	Re: timing problem, ignition timing at bottom dead centre???	wilbo666	Sun, 20 November 2005 14:04
	Re: timing problem, ignition timing at bottom dead centre???	oldcorollas	Sun, 20 November 2005 15:16
	Re: timing problem, ignition timing at bottom dead centre???	xolent	Sun, 20 November 2005 15:26
	Re: timing problem, ignition timing at bottom dead centre???	Gwaijaitat	Sun, 20 November 2005 22:49
	Re: timing problem, ignition timing at bottom dead centre???	Gwaijaitat	Sun, 20 November 2005 23:06
	Re: timing problem, ignition timing at bottom dead centre???	oldcorollas	Mon, 21 November 2005 00:37

Previous Topic:	tuning freedom piggy back ecu?
Next Topic:	TVIS ON 4AGE

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.