| Author | Topic |
|---|
Location:
Kita-Ku, Sapporo, Japan
Registered:
January 2003
|
|
Re: timing problem, ignition timing at bottom dead centre???
|
Mon, 21 November 2005 00:37
|
 |
well... you say that the timing mark is approx 180 degrees out.... which means that cyl 1 and 4 are BDC... but that means cyls 2 and 3 are TDC..... so why not just use cyl 2 or 3 for the timing source?
if the pulley is marked with TDC, and the timing mark is about 170 deg away from it, you MUST have to use cyl 2 or 3 for te timing..
rgardless of conventional thinking, if the pulley is marked like that.. thats the way you do it... what does the service manual say?
|
|
|
| | Subject | Poster | Date |
|---|
 |
timing problem, ignition timing at bottom dead centre???
|
Gwaijaitat | Sun, 20 November 2005 13:06 |
|
Re: timing problem, ignition timing at bottom dead centre???
|
wilbo666 | Sun, 20 November 2005 14:04 |
|
Re: timing problem, ignition timing at bottom dead centre???
|
oldcorollas | Sun, 20 November 2005 15:16 |
|
Re: timing problem, ignition timing at bottom dead centre???
|
xolent | Sun, 20 November 2005 15:26 |
|
Re: timing problem, ignition timing at bottom dead centre???
|
Gwaijaitat | Sun, 20 November 2005 22:49 |
|
Re: timing problem, ignition timing at bottom dead centre???
|
Gwaijaitat | Sun, 20 November 2005 23:06 |
|
Re: timing problem, ignition timing at bottom dead centre???
|
oldcorollas | Mon, 21 November 2005 00:37 |
