Toymods Car Club
www.toymods.org.au
F.A.Q. F.A.Q.    Register Register    Login Login    Home Home
Members Members    Search Search
Toymods » Tech & Conversions » Fuel Pressures and Injectors

Show: Today's Posts  :: Show Polls 
Email to friend 
Return to the default flat view Create a new topic Submit Reply
AuthorTopic
Viper_III
Regular


Location:
Hawthorn, Vic
Registered:
March 2005
Re: 2JZ Fuel Pressures/ g.min to cc conversion Wed, 23 November 2005 21:46 Go to previous messageGo to previous message
alrighty.

thanks to norbs found out that the stock fuel pressure regulator is set to about 32psi,which is about 2.45bar.

also calculated 660cc injectors are what im after.

only 'slight' issue im still converned about, is that the injectors are rated@ 660cc, so at full rate, they will inject a total of 3960cc's of petrol, which equates to ~237L/hr.

Fuel pump delivers only 200l/hr. But, since the fuel pump is 200L/hr @ 5bar, where as the injectors inject 237
L/hr at 2.7bar, im guessing as the pump is pumping at higher pressure, the pressure ofset increases the flow rate? or will i see a loss in fuel pressure??? and thus require a secondary fuel pump??


UPDATE

talking to some fuel guys, it seems that flow rates have to be met. which means either, getting 2 pumps to make up the loss, or getting a single pump that can supply the desired rate. So off to make some phone calls to see what i can find. Ive been told to look at supercharged VS commo pumps and injectors.
Keep you updated

[Updated on: Wed, 23 November 2005 23:15]

  Send a private message to this user    

SubjectPosterDate
Read Message   Fuel Pressures and Injectors Viper_IIITue, 22 November 2005 05:11
Read Message   Re: 2JZ Fuel Pressures/ g.min to cc conversion Viper_IIIWed, 23 November 2005 01:12
Read Message   Re: 2JZ Fuel Pressures/ g.min to cc conversion SkipWed, 23 November 2005 01:48
Read Message   Re: 2JZ Fuel Pressures/ g.min to cc conversion Viper_IIIWed, 23 November 2005 02:15
Read Message   Re: 2JZ Fuel Pressures/ g.min to cc conversion STR8 2.8Wed, 23 November 2005 02:37
Read Message   Re: 2JZ Fuel Pressures/ g.min to cc conversion Viper_IIIWed, 23 November 2005 04:29
Read Message   Re: 2JZ Fuel Pressures/ g.min to cc conversion  Viper_IIIWed, 23 November 2005 21:46
Read Message   Re: 2JZ Fuel Pressures/ g.min to cc conversion oldcorollasThu, 24 November 2005 03:43
Read Message   Re: Fuel Pressures and Injectors mic*Thu, 24 November 2005 05:19
Read Message   Re: Fuel Pressures and Injectors oldcorollasThu, 24 November 2005 06:50
Read Message   Re: Fuel Pressures and Injectors oldcorollasThu, 24 November 2005 06:53
Read Message   Re: Fuel Pressures and Injectors oldcorollasThu, 24 November 2005 06:59
Read Message   Re: Fuel Pressures and Injectors mic*Thu, 24 November 2005 06:59
Read Message   Re: Fuel Pressures and Injectors mic*Thu, 24 November 2005 05:21
Read Message   Re: Fuel Pressures and Injectors oldcorollasThu, 24 November 2005 06:14
Read Message   Re: Fuel Pressures and Injectors mic*Thu, 24 November 2005 06:47
Read Message   Re: Fuel Pressures and Injectors mic*Thu, 24 November 2005 07:00
Read Message   Re: Fuel Pressures and Injectors oldcorollasThu, 24 November 2005 07:20
Read Message   Re: Fuel Pressures and Injectors Viper_IIIThu, 24 November 2005 07:22
Read Message   Re: Fuel Pressures and Injectors Viper_IIIThu, 24 November 2005 22:47
Read Message   Re: Fuel Pressures and Injectors mic*Fri, 25 November 2005 03:38
Read Message   Re: Fuel Pressures and Injectors Viper_IIIFri, 25 November 2005 03:43
Read Message   Re: Fuel Pressures and Injectors mic*Fri, 25 November 2005 04:00
Previous Topic:2jz GTE into Mz20 Soarer
Next Topic:Why do i have a fuel line leaking into my chassis rail? (ke20 / ke25)!

Goto Forum:
-=] Back to Top [=-

Current Time: Thu Jan 16 12:08:44 UTC 2025

Total time taken to generate the page: 0.0068249702453613 seconds

Bandwidth utilization bar

.:: Contact :: Home ::.

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.