Toymods Car Club
www.toymods.org.au
F.A.Q. F.A.Q.    Register Register    Login Login    Home Home
Members Members    Search Search
Toymods » Tech & Conversions » Fuel Pressures and Injectors

Show: Today's Posts  :: Show Polls 
Email to friend 
Return to the default flat view Create a new topic Submit Reply
AuthorTopic
oldcorollas
Forums Junkie


Location:
Kita-Ku, Sapporo, Japan
Registered:
January 2003
 
Re: 2JZ Fuel Pressures/ g.min to cc conversion Thu, 24 November 2005 03:43 Go to previous messageGo to previous message
are the injectors rated at 100% duty or 80% duty?
what rail pressure are they rated at?

typical rail pressures are around 40psi.. a nice figure rounded to work from..

what a fuel pump CAN do, and what it does do depends on the pressure regulator.
the regulator controls the pressure the pump is putting out by resistance. so if your reg is set to 2.7bar, the pump puts out 2.7bar. at lower than 5bar, it will flow more. the flow graphs should be easily available for the 044

what boost will you run?

assuming you run 1.5bar, and rail pressure is 2.7, then total rail pressuire is 4.2.. so what does the 044 pump at 4.2bar?

what about 2 walbro pumps, they can be had cheaply and there are high pressure versions (check the flow graphs first)...
they are about 220L/hr at 2.7bar, but maybe 150L at 60-70psi
  Send a private message to this user    

SubjectPosterDate
Read Message   Fuel Pressures and Injectors Viper_IIITue, 22 November 2005 05:11
Read Message   Re: 2JZ Fuel Pressures/ g.min to cc conversion Viper_IIIWed, 23 November 2005 01:12
Read Message   Re: 2JZ Fuel Pressures/ g.min to cc conversion SkipWed, 23 November 2005 01:48
Read Message   Re: 2JZ Fuel Pressures/ g.min to cc conversion Viper_IIIWed, 23 November 2005 02:15
Read Message   Re: 2JZ Fuel Pressures/ g.min to cc conversion STR8 2.8Wed, 23 November 2005 02:37
Read Message   Re: 2JZ Fuel Pressures/ g.min to cc conversion Viper_IIIWed, 23 November 2005 04:29
Read Message   Re: 2JZ Fuel Pressures/ g.min to cc conversion Viper_IIIWed, 23 November 2005 21:46
Read Message   Re: 2JZ Fuel Pressures/ g.min to cc conversion  oldcorollasThu, 24 November 2005 03:43
Read Message   Re: Fuel Pressures and Injectors mic*Thu, 24 November 2005 05:19
Read Message   Re: Fuel Pressures and Injectors oldcorollasThu, 24 November 2005 06:50
Read Message   Re: Fuel Pressures and Injectors oldcorollasThu, 24 November 2005 06:53
Read Message   Re: Fuel Pressures and Injectors oldcorollasThu, 24 November 2005 06:59
Read Message   Re: Fuel Pressures and Injectors mic*Thu, 24 November 2005 06:59
Read Message   Re: Fuel Pressures and Injectors mic*Thu, 24 November 2005 05:21
Read Message   Re: Fuel Pressures and Injectors oldcorollasThu, 24 November 2005 06:14
Read Message   Re: Fuel Pressures and Injectors mic*Thu, 24 November 2005 06:47
Read Message   Re: Fuel Pressures and Injectors mic*Thu, 24 November 2005 07:00
Read Message   Re: Fuel Pressures and Injectors oldcorollasThu, 24 November 2005 07:20
Read Message   Re: Fuel Pressures and Injectors Viper_IIIThu, 24 November 2005 07:22
Read Message   Re: Fuel Pressures and Injectors Viper_IIIThu, 24 November 2005 22:47
Read Message   Re: Fuel Pressures and Injectors mic*Fri, 25 November 2005 03:38
Read Message   Re: Fuel Pressures and Injectors Viper_IIIFri, 25 November 2005 03:43
Read Message   Re: Fuel Pressures and Injectors mic*Fri, 25 November 2005 04:00
Previous Topic:2jz GTE into Mz20 Soarer
Next Topic:Why do i have a fuel line leaking into my chassis rail? (ke20 / ke25)!

Goto Forum:
-=] Back to Top [=-

Current Time: Thu Jan 16 12:12:59 UTC 2025

Total time taken to generate the page: 0.012979030609131 seconds

Bandwidth utilization bar

.:: Contact :: Home ::.

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.