| Author | Topic |
|---|
I supported Toymods
Location:
melbourne.victoria.austra...
Registered:
June 2002
|
|
Re: info on a 4a-ge into a TA22
|
Thu, 24 November 2005 23:02
|
 |
yeah my message read about like this :
the drivers side one uses the std 2t mount with the flange facing the block cut off.
it measures 101mm from the face of the flange on the block at the top and 70mm from the face of the flange on the block at the bottom
that should give you the angle you need. actually if you cut n shut the std 2T one to those lengths including the face plate you should be on a winner.
the passenger side used a ae86 mount modified.
at the top its 115mm from the flange to the top
at the bottom its 60mm from the flange to the bottom
the right hand or the starter motor side of the mount had to be shimmed out 4mm to make it sit right
i used 35mm ford cortina pads as mounts. circular pads with a bolt straight thru them basically.
|
|
|
