| Author | Topic |
|---|
Location:
MACKAY
Registered:
May 2002
|
|
Re: Brake booster question
|
Tue, 25 February 2003 12:09
 
|
 |
Shane
I used a tandem master cylinder of a early 80's corolla , I can't remember the model as it was about 10 years ago I did this , But it bolts straight on , You only have to do a bit of reshaping of the lines to screw in , This master cylinder has a smaller bore which increases pressure to the wheels , To further increase breaking power I also fitted RA40 struts , disks and calipers , The pistons & bore in the RA 40 are larger than the TA22 so this increases hydraulic pressure to the pads even more , On the rear I have 10' drums which is more than enough for the TA22 , I actually had to adjust the proportioning valve to reduce pressure to the rear as they were to severe .
And I still have a good high hard pedal .
Trevor
|
|
|
| | Subject | Poster | Date |
|---|
 |
Brake booster question
|
Cool1 | Tue, 25 February 2003 08:01 |
|
Re: Brake booster question
|
Youngy | Tue, 25 February 2003 11:12 |
|
Re: Brake booster question
|
Cool1 | Tue, 25 February 2003 11:58 |
|
Re: Brake booster question
|
TA22-3SGTE | Tue, 25 February 2003 12:09 |
|
Re: Brake booster question
|
Cool1 | Tue, 25 February 2003 12:14 |
|
Re: Brake booster question
|
TA22-3SGTE | Tue, 25 February 2003 12:38 |
|
Re: Brake booster question
|
Cool1 | Tue, 25 February 2003 12:43 |
|
Re: Brake booster question
|
TA22-3SGTE | Tue, 25 February 2003 12:52 |
|
Re: Brake booster question
|
Cool1 | Tue, 25 February 2003 12:55 |
|
Re: Brake booster question
|
TA22-3SGTE | Tue, 25 February 2003 13:06 |
|
Re: Brake booster question
|
Cool1 | Tue, 25 February 2003 20:57 |
|
Re: Brake booster question
|
TA22-3SGTE | Wed, 26 February 2003 12:21 |
|
Re: Brake booster question
|
Cool1 | Wed, 26 February 2003 12:32 |
|
Re: Brake booster question
|
willwal98 | Thu, 13 March 2003 04:43 |
|
Re: Brake booster question
|
Cool1 | Thu, 13 March 2003 06:59 |
