F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » Aristo conversion into skyline. Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
Dennis2JZ Newcomer Location: Brisbane Registered: August 2005	Re: Aristo conversion into skyline. Mon, 28 November 2005 00:10 Yeah sweet. If worst comes to worst. I hope it just some minor prob. Here is what I done. It runs. Not well but it started. I got rid of the big loom plug I traced all the wires that went from the small ECU plug to the big loom plug and joined them all up. And I connected 12V to these. Small ECU plug Pins 1 - 12V ignition 31 - 12V ignition 32 - 12V ignition 33 - 12V battery. Big Loom plug: Big black - starter sol Black with brown stipe - 12V ignition Black with brown stipe - 12V ignition I traced all the wires that went from the small ECU plug to the big loom plug in the half cut and connected them to where I cut the big plug of from the engine loom. Theres 7 extra. Does any of this make any sense? [Updated on: Mon, 28 November 2005 00:11] [Report message to a moderator]

	Subject	Poster	Date
	Aristo conversion into skyline.	Dennis2JZ	Sun, 27 November 2005 12:46
	Re: Aristo conversion into skyline.	sideshow	Sun, 27 November 2005 22:21
	Re: Aristo conversion into skyline.	Dennis2JZ	Mon, 28 November 2005 00:10
	Re: Aristo conversion into skyline.	Dennis2JZ	Mon, 05 December 2005 09:36

Previous Topic:	KP Starlet F Code IRS Conversion
Next Topic:	Wanted 4agte microtech tuned map

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.