Yeah I know its possible just wanna know how to do it.
I know what parts are required such as apdated plate, quads, safc and so.
The closest thing I found to a guide was this (written by drift86levin):
Quote:
i have the 20V quads on mine..stock ecu..you need an adaptor plate..about $250..here is a link http://technotoytuning.com/t3_site_pages/products/ itb_adapter.html
you don't use any of the injection stuff off a 20V..just the ITB's there literally individual, so don't take them off till you have the adaptor plate..to make them run on a stock ECU you have to tap a 3mm fitting into each runner of this manifold for the stock map sensor, and a seperate 5mm for the brake booster..i thought i would mention this here cos if you ask it in the tech section all they will do is say search!
most of the quads go for around the 200-$250 mark.. i got mine deliverd for $250 with all the 20V junk on it still (side feed injectors etc etc) so i geuss it's just more to sell
Wed, 30 November 2005 04:24
