F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » 4AGZE with 271degree 8.1mm lift cams, standard computer. Anybody done this?? Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
sideshow Forums Junkie Location: sydney Registered: March 2003	Re: 4AGZE with 271degree 8.1mm lift cams, standard computer. Anybody done this?? Fri, 02 December 2005 10:56 with std ecus and an air flow meter the idle gets erratic if the cam lift is high and i think even with a map sensored gze or some std ecus and very hi lift cams you tend to loose vacuum so that means the ecu has a different load rating or measure point that the original idle one due to very little vacuum cause by hi lift this causes erratic idle and u might have to run at 1500 or so rpm [Report message to a moderator]

	Subject	Poster	Date
	4AGZE with 271degree 8.1mm lift cams, standard computer. Anybody done this??	cnic82	Wed, 30 November 2005 11:57
	Re: 4AGZE with 271degree 8.1mm lift cams, standard computer. Anybody done this??	cnic82	Thu, 01 December 2005 12:03
	Re: 4AGZE with 271degree 8.1mm lift cams, standard computer. Anybody done this??	4agte	Thu, 01 December 2005 20:56
	Re: 4AGZE with 271degree 8.1mm lift cams, standard computer. Anybody done this??	AEXX	Fri, 02 December 2005 00:58
	Re: 4AGZE with 271degree 8.1mm lift cams, standard computer. Anybody done this??	cnic82	Fri, 02 December 2005 05:51
	Re: 4AGZE with 271degree 8.1mm lift cams, standard computer. Anybody done this??	Big T	Fri, 02 December 2005 08:59
	Re: 4AGZE with 271degree 8.1mm lift cams, standard computer. Anybody done this??	sideshow	Fri, 02 December 2005 10:56
	Re: 4AGZE with 271degree 8.1mm lift cams, standard computer. Anybody done this??	cnic82	Fri, 02 December 2005 22:02
	Re: 4AGZE with 271degree 8.1mm lift cams, standard computer. Anybody done this??	4agte	Fri, 02 December 2005 22:33
	Re: 4AGZE with 271degree 8.1mm lift cams, standard computer. Anybody done this??	Rallystanza	Fri, 02 December 2005 22:50
	Re: 4AGZE with 271degree 8.1mm lift cams, standard computer. Anybody done this??	4agte	Fri, 02 December 2005 23:21
	Re: 4AGZE with 271degree 8.1mm lift cams, standard computer. Anybody done this??	4agte	Fri, 02 December 2005 23:23
	Re: 4AGZE with 271degree 8.1mm lift cams, standard computer. Anybody done this??	cnic82	Sun, 04 December 2005 00:59

Previous Topic:	Lexus V8 fault messages in japanese
Next Topic:	Installing Bushes. *RA23*

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.