F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » emanage on 4ag Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
jasonp1977 Regular Location: Brisbane Registered: May 2002	Re: emanage on 4ag Fri, 02 December 2005 21:04 you're advancing the emanage to the point where the factory ECU is pulling the timing to the point where it almost goes into limp mode. I would recommend dyno tuning the car with an OBD2 scanner connected so you can monitor the ECU's timing and knock, then you can see when you have gone too far as you can read the actual ECU's interpretation of ignition advance and knock instead of guessing with EGT and AFR. The ECU picks up knock much earlier than you think, you will see when you hook up a scanner. [Report message to a moderator]

	Subject	Poster	Date
	emanage on 4ag	DacBietAE86	Fri, 21 October 2005 03:34
	Re: emanage on 4ag	jasonp1977	Fri, 21 October 2005 10:39
	Re: emanage on 4ag	tourerv	Fri, 02 December 2005 06:22
	Re: emanage on 4ag	jasonp1977	Fri, 02 December 2005 07:00
	Re: emanage on 4ag	tourerv	Fri, 02 December 2005 07:18
	Re: emanage on 4ag	jasonp1977	Fri, 02 December 2005 08:20
	Re: emanage on 4ag	tourerv	Fri, 02 December 2005 19:45
	Re: emanage on 4ag	jasonp1977	Fri, 02 December 2005 21:04
	Re: emanage on 4ag	tourerv	Sat, 03 December 2005 06:50

Previous Topic:	PLEASE HELP BECAUSE IM GOING TO BURN MY AE82 TO THE GROUND!!
Next Topic:	Question - VVT-i engines

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.