| Author | Topic |
|---|
Location:
Melbourne
Registered:
May 2004
|
|
Re: 4AGZE with 271degree 8.1mm lift cams, standard computer. Anybody done this??
|
Fri, 02 December 2005 22:50
 
|
 |
| 4agte wrote on Sat, 03 December 2005 09:33 |
I know on the aw11 4agze with the stock computer and 272 deg trd cams with a cusco pulley made 10kw atw more so definatley a difference
|
How did the engine run though?
Do you know or can you find out the lift on the said TRD cams??
Would be nice to know this too.
Cheers,
Jez
|
|
|
| | Subject | Poster | Date |
|---|
 |
4AGZE with 271degree 8.1mm lift cams, standard computer. Anybody done this??
|
cnic82 | Wed, 30 November 2005 11:57 |
|
Re: 4AGZE with 271degree 8.1mm lift cams, standard computer. Anybody done this??
|
cnic82 | Thu, 01 December 2005 12:03 |
|
Re: 4AGZE with 271degree 8.1mm lift cams, standard computer. Anybody done this??
|
4agte | Thu, 01 December 2005 20:56 |
|
Re: 4AGZE with 271degree 8.1mm lift cams, standard computer. Anybody done this??
|
AEXX | Fri, 02 December 2005 00:58 |
|
Re: 4AGZE with 271degree 8.1mm lift cams, standard computer. Anybody done this??
|
cnic82 | Fri, 02 December 2005 05:51 |
|
Re: 4AGZE with 271degree 8.1mm lift cams, standard computer. Anybody done this??
|
Big T | Fri, 02 December 2005 08:59 |
|
Re: 4AGZE with 271degree 8.1mm lift cams, standard computer. Anybody done this??
|
sideshow | Fri, 02 December 2005 10:56 |
|
Re: 4AGZE with 271degree 8.1mm lift cams, standard computer. Anybody done this??
|
cnic82 | Fri, 02 December 2005 22:02 |
|
Re: 4AGZE with 271degree 8.1mm lift cams, standard computer. Anybody done this??
|
4agte | Fri, 02 December 2005 22:33 |
|
Re: 4AGZE with 271degree 8.1mm lift cams, standard computer. Anybody done this??
|
Rallystanza | Fri, 02 December 2005 22:50 |
|
Re: 4AGZE with 271degree 8.1mm lift cams, standard computer. Anybody done this??
|
4agte | Fri, 02 December 2005 23:21 |
|
Re: 4AGZE with 271degree 8.1mm lift cams, standard computer. Anybody done this??
|
4agte | Fri, 02 December 2005 23:23 |
|
Re: 4AGZE with 271degree 8.1mm lift cams, standard computer. Anybody done this??
|
cnic82 | Sun, 04 December 2005 00:59 |
