Toymods Car Club
www.toymods.org.au
F.A.Q. F.A.Q.    Register Register    Login Login    Home Home
Members Members    Search Search
Toymods » Tech & Conversions » MR2 Gen3 conversion, error code 14

Show: Today's Posts  :: Show Polls 
Email to friend 
Return to the default flat view Create a new topic Submit Reply
AuthorTopic
DamMR2T
Occasional Poster


Location:
NSW
Registered:
August 2003
Re: MR2 Gen3 conversion, error code 14 Sat, 03 December 2005 23:57 Go to previous messageGo to previous message
There are 2 looms:
1. One that connects to the engine(injectors etc) and the 2 plugs to the ECU.
2. One that goes to the left hand side kick panel in the cabin and 1 plug to the ECU.

I used the engine loom that came with the Gen3, and the loom already in my car that goes to the kick panel(as the one that came with my engine was cut).
Therefore i have mixed and matched.

I know my previous engine was running without a fuel pump relay(must have been wired to 12v or something), whereas the Gen3 had the wiring for the fuel pump relay.
  Send a private message to this user    

SubjectPosterDate
Read Message   MR2 Gen3 conversion, error code 14 DamMR2TSat, 03 December 2005 11:58
Read Message   Re: MR2 Gen3 conversion, error code 14 sideshowSat, 03 December 2005 23:18
Read Message   Re: MR2 Gen3 conversion, error code 14  DamMR2TSat, 03 December 2005 23:57
Read Message   Re: MR2 Gen3 conversion, error code 14 sideshowSun, 04 December 2005 00:55
Read Message   Re: MR2 Gen3 conversion, error code 14 DamMR2TSun, 04 December 2005 04:51
Read Message   Re: MR2 Gen3 conversion, error code 14 davedaveSun, 04 December 2005 19:49
Read Message   Re: MR2 Gen3 conversion, error code 14 DamMR2TTue, 06 December 2005 10:42
Read Message   Re: MR2 Gen3 conversion, error code 14 camryGT?Sun, 11 December 2005 02:47
Previous Topic:topping up trolley jack oil
Next Topic:Just bought an RA65

Goto Forum:
-=] Back to Top [=-

Current Time: Mon Nov 25 07:54:36 UTC 2024

Total time taken to generate the page: 0.0039570331573486 seconds

Bandwidth utilization bar

.:: Contact :: Home ::.

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.