| Author | Topic |
|---|
Location:
parkdale, Victoria
Registered:
May 2005
|
|
Re: shelldrake's ta22
|
Mon, 05 December 2005 14:00
 
|
 |
In the process of building a 2t/3t efi hybrid. So far the block has been bored 40 thou over the standard to suit the new ACL pistons. Will be using the existing 3t crank. TRD profile cams. Shot peened rods. (Chevy ARP rod bolts were installed into them too) The head I got have already had some work done to it, but is being inspected anyway to ensure there is no weakness in the assembly. Getting some CT1 coated main and big end bearings from the states too. (Should ensure the engine has a long life). Will be running a microtech LT4 when I get it back in the car. Anyway, I just painted the engine bay in a hammered metal blue and it came up pretty well. I also am getting some GT bonnet flutes rechromed. I've had the front and rear bumpers done now too. Got a Gt styled front lip(Not the real thing, but wil look good), GT grill on the way. Will give the full update when the car is back together.
|
|
|
| | Subject | Poster | Date |
|---|
 |
shelldrake's ta22
|
shelldrake | Thu, 01 September 2005 04:01 |
|
Re: shelldrake's ta22
|
shelldrake | Thu, 01 September 2005 04:45 |
|
Re: shelldrake's ta22
|
riceburna73 | Thu, 01 September 2005 06:43 |
|
Re: shelldrake's ta22
|
shelldrake | Thu, 01 September 2005 06:48 |
|
Re: shelldrake's ta22
|
EldarO | Thu, 01 September 2005 14:17 |
|
Re: shelldrake's ta22
|
riceburna73 | Thu, 01 September 2005 14:23 |
|
Re: shelldrake's ta22
|
sv_i | Thu, 01 September 2005 22:36 |
|
Re: shelldrake's ta22
|
shelldrake | Fri, 02 September 2005 00:02 |
|
Re: shelldrake's ta22
|
shelldrake | Mon, 05 December 2005 14:00 |
|
Re: shelldrake's ta22
|
72PASSEDU | Sat, 10 December 2005 18:57 |
