Toymods Car Club
www.toymods.org.au
F.A.Q. F.A.Q.    Register Register    Login Login    Home Home
Members Members    Search Search
Toymods » Tech & Conversions » 4age Overheating Query?!?!? Blown Head Gasket?!?!?

Show: Today's Posts  :: Show Polls 
Email to friend 
Return to the default flat view Create a new topic Submit Reply
AuthorTopic
nos4ag
Regular


Location:
Adelaide
Registered:
November 2002
Re: 4age Overheating Query?!?!? Blown Head Gasket?!?!? Thu, 08 December 2005 09:40 Go to previous messageGo to previous message
Sorry, it was suppose to say "so I drained it out and refilled it properly". My bad Razz
UPDATE!!!!
I started the car when I got home this afternoon, and it still sounded like a WRX. I reved it to about 3 grand for about 10-20 second on and off and then the WRX sound (running on 2-3 cylinders) went away. I took the radiator cap off and watched some small bubbles rise as I topped it up slightly. When the car was HOT, there were absolutely NO bubbles coming out the radiator whatsoever!!!
The top radiator hose was warm but still spongy to grab, but the lower radiator hose was hot and very solid. In other words, I couldnt squeeze it. This hose goes to the thermostat housing. Then......This is the wierd bit!! The car was still running, and then it started going from 1000rpm to 2500rpm and then back to 1000rpm again and so forth and wouldnt stop. I have always taken the thermo fan switch off in all my Twin Cam's with no problem. As soon as I connected the switch back up again, the car idled fine and the temperature guage stayed just under halfway after being run for about 15 minutes.
- Shall I check the thermostat?
- There was a small amount of smoke/steam/water coming out of the exhaust, but Im not still not losing any water out the radiator.
- There is NO oil in the water, and there is still NO water in the oil aswell.
What next guys????????
  Send a private message to this user    

SubjectPosterDate
Read Message   4age Overheating Query?!?!? Blown Head Gasket?!?!? nos4agThu, 08 December 2005 02:52
Read Message   Re: 4age Overheating Query?!?!? Blown Head Gasket?!?!? 4agteThu, 08 December 2005 03:56
Read Message   Re: 4age Overheating Query?!?!? Blown Head Gasket?!?!? nos4agThu, 08 December 2005 04:37
Read Message   Re: 4age Overheating Query?!?!? Blown Head Gasket?!?!? beige_banditThu, 08 December 2005 05:41
Read Message   Re: 4age Overheating Query?!?!? Blown Head Gasket?!?!? mr2gzeThu, 08 December 2005 07:23
Read Message   Re: 4age Overheating Query?!?!? Blown Head Gasket?!?!? 4agteThu, 08 December 2005 21:47
Read Message   Re: 4age Overheating Query?!?!? Blown Head Gasket?!?!? mic*Thu, 08 December 2005 08:03
Read Message   Re: 4age Overheating Query?!?!? Blown Head Gasket?!?!?  nos4agThu, 08 December 2005 09:40
Read Message   Re: 4age Overheating Query?!?!? Blown Head Gasket?!?!? JZX-83TThu, 08 December 2005 12:06
Read Message   Re: 4age Overheating Query?!?!? Blown Head Gasket?!?!? nos4agThu, 08 December 2005 19:55
Previous Topic:Gen2 3SGE unstable idling.
Next Topic:20V vs 4AGE 16V with big valves

Goto Forum:
-=] Back to Top [=-

Current Time: Sat Feb 1 20:51:51 UTC 2025

Total time taken to generate the page: 0.0059008598327637 seconds

Bandwidth utilization bar

.:: Contact :: Home ::.

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.