Toymods Car Club
www.toymods.org.au
F.A.Q. F.A.Q.    Register Register    Login Login    Home Home
Members Members    Search Search
Toymods » Tech & Conversions » MR2 Gen3 conversion, error code 14

Show: Today's Posts  :: Show Polls 
Email to friend 
Return to the default flat view Create a new topic Submit Reply
AuthorTopic
camryGT?
Regular


Location:
Newcastle
Registered:
April 2004
Re: MR2 Gen3 conversion, error code 14 Sun, 11 December 2005 02:47 Go to previous message
I've had similar problems with toyotas before, most often it was because the old motor had an air flow metre with the wiring for the fuel pump/circuit opening relay running through a set of contacts in the AFM.
I think your gen 3 is map sensed and doesn't have these contacts.
The circuit opening relay has 2 coils one for when the car is running (through AFM or from gen3 ecu) and another from the starter circuit to turn on the fuel pump on while starting.
So your fuel pump would only run while you were cranking the engine.
Something to keep in mind for anyone installing an aftermarket ecu as well.
  Send a private message to this user    

SubjectPosterDate
Read Message   MR2 Gen3 conversion, error code 14 DamMR2TSat, 03 December 2005 11:58
Read Message   Re: MR2 Gen3 conversion, error code 14 sideshowSat, 03 December 2005 23:18
Read Message   Re: MR2 Gen3 conversion, error code 14 DamMR2TSat, 03 December 2005 23:57
Read Message   Re: MR2 Gen3 conversion, error code 14 sideshowSun, 04 December 2005 00:55
Read Message   Re: MR2 Gen3 conversion, error code 14 DamMR2TSun, 04 December 2005 04:51
Read Message   Re: MR2 Gen3 conversion, error code 14 davedaveSun, 04 December 2005 19:49
Read Message   Re: MR2 Gen3 conversion, error code 14 DamMR2TTue, 06 December 2005 10:42
Read Message   Re: MR2 Gen3 conversion, error code 14  camryGT?Sun, 11 December 2005 02:47
Previous Topic:topping up trolley jack oil
Next Topic:Just bought an RA65

Goto Forum:
-=] Back to Top [=-

Current Time: Fri Nov 8 15:22:04 UTC 2024

Total time taken to generate the page: 0.0058281421661377 seconds

Bandwidth utilization bar

.:: Contact :: Home ::.

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.